Product

 

 

​SILBIONE RT Gel 4743 A&B is delivered as two viscous liquid components, which once mixed and cured, transform into an elastic and resistant adhesive gel. Polymerisation occurs without formation of heat.

Mixing : The components A and B are mixed by weight (ratio 1:1). The mixing can be carried out either by hand or using a low-speed electric or pneumatic mixer to minimise the introduction of air and to avoid any temperature increase. Static mixers  can also be used to mix both components. The mixture should be degassed to eliminate any entrapped air.

Curing: The system polymerises at 23°C. The curing may be accelerated by heat. The product cures in 5 minutes at a temperature of 150°C. curing conditions vcan be optimized according to the curing equipment.

SILBIONE RT GEL 4743 A 储存温度要介于 -10 °C/ 14 °F 和 30 °C/ 86 °F 之间,从生产日期开始产品保质 6 个月请查看安全数据表美国药典标准USP Class VI

SILBIONE RT GEL 4743 A

​SILBIONE RT Gel 4743 A&B is a two component silicone gel specifically developped for adhesion to skin.

双组份室温硅橡胶

凝胶

美国药典标准USP Class VI

​SILBIONE RT Gel 4743 A&B has a very good adhesion on dry skin and was designed to improve wear times of silicone dressings. Thanks to its rheological properties, this product is suitable to coating operations of  open substrates such as non-wovens or fabrics.

 

  • Wound contact layers
  • Tapes
  • First aid bandages

 

中南美;欧洲中东非洲;北美

 Characteristics_A

 

 

粘度52500PairedCompISO 2555mPa.s
颜色TransparentPairedCompEuropean Pharmacopea

 Characteristics_B

 

 

颜色TransparentPairedCompEuropean Pharmacopea
粘度52500PairedCompISO 2555mPa.s

 

 

 Table_Characteristics_A_And_B

 

 

penetration_a142c699-2b17-4f82-882a-75f6253332edpenetration_a142c699-2b17-4f82-882a-75f6253332ed针入度170PairedMixISO 21371/10mm

 

 

 

 

SILBIONE RT GEL 4743 BSILBIONE RT GEL 4743 B/our_offer/Product/90061591/90061590/SILBIONE-RT-GEL-4743-B

 

 

 

 

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS