Remix each of the two components (part A and B) every time before using.
1. Mixing the two components
100 parts of SILBIONE® RTV 4428 A add 10 parts of SILBIONE® RV 4428 B. The two components are thoroughly mixed using an electric or pneumatic mixer, working at low speed to limit the inclusion of air in the mixture. In all cases, it is essential to cure the product under correct conditions and to ensure that SILBIONE® RTV 4428 A and B both the same batch number. Parts A and B must be matched in order to obtain correct curing.
After mixing base and catalyst, it is recommended to degas to eliminate entrapped air.
The SILBIONE® RTV 4428 is degassed under vacuum pressure of 30 to 50 mbar.
Under vacuum pressure, the product will expand 4 at 5 times its initial volume and forms bubble on its surface.
These bubbles will disappear gradually and the mixture will sink back down to its initial volume within few minutes. Releasing the vacuum once or twice during the operation will improve gas removal.
Remark: release the vacuum several times improves the degassing. For easier degassing only fill a recipient to 1/3 of its height.
3. Making the moulds
This is performed by gravity or under pressure. Since the viscosity of the two products rises relatively slowly, this helps make it easier to process SILBIONE® RTV 4428 A and B.
At a temperature of 25 °C, SILBIONE® RTV 4428 A and B cures in around 24 hours. Heat helps accelerate curing.
Recommended curing temperatures: 4 hours at 65 °C counted from the time when the or 1 hour at 100 °C whole RTV mass is at the required or 30 minutes at 150 °C temperature
When taking impressions, SILBIONE® RTV 4428 A and B may stick to the model. It is therefore advisable to form a barrier between the RTV and the model using a separating agent (e.g. Codex Vaseline grease) applied in a very thin coat.
Make sure that the packaging is hermetically sealed after each use
|SILBIONE RTV 4428 B TRANSPARENT 储存温度要介于 -20 °C/ -4 °F 和 30 °C/ 86 °F 之间，从生产日期开始产品保质 12 个月||请查看安全数据表|
SILBIONE RTV 4428 B TRANSPARENT
SILBIONE® RTV 4428 A and B is a two component, silicone elastomer which cures at room temperature by a polyaddition reaction. The cross linking can be accelerated by heating. This RTV Silbione is a fluid paste that once cured, transforms into a strong, elastic material. When correctly cured, SILBIONE® RTV 4428 A and B is not notably toxic, and local skin application is generally well tolerated.
Easy processing due to the good fluidity
High tear strength
Low linear shrinkage
Natural release properties
Outstandingly chemically inert
Excellent resistance to natural ageing
SILBIONE® RTV 4428 A and B is suited to various applications,
especially in the following fields:
PHARMACY: slow-release systems for active ingredients, etc.
PARAMEDICAL: orthopaedics, medical devices in contact with skin, etc