Product

 

 

The recommended dose of BLUESIL ADD 720 is 5 % with respect to the HCR pre-catalysed compound. It is easily added on a 2-roll mill.

Comments: With transparent HCR compounds opacification may occur. Furthermore, BLUESIL ADD 720 may slightly lower the tensile strength of cured silicone compounds (by between approx. 0.5 to 1 MPa).

Example: The following tables give the change in mechanical properties for MF 135 U and
MF 175 U obtained after ageing for 70 hours at  150 °C in ASTM oils 1 and 3. These values are measured after adding 2-4 dichloro benzoyl peroxide with 50 % active ingredients (Peroxide E) and curing for 8 minutes at 115 °C and post-curing the test slabs for 4 hours at 200 °C.

Resistance to ASTM Oil n°1

PropertiesVariation in properties after immersion for 70 h at 150 °C
MF 135 UMF 175 U
Control5 %
ADD 720
Control5 %
ADD 720
Shore A hardness, points– 5– 5+ 3– 2
Tensile strength, Mpa– 37– 24– 39– 21
Elongation at break, %– 23– 7– 53– 9
Variation in volume, %+ 4+ 5+ 2+ 3

 

Resistance to ASTM Oil n°3

PropertiesVariation in properties after immersion for 70 h at 150 °C
MF 135 UMF 175 U
Control5 %
ADD 720
Control5 %
ADD 720
Shore A hardness, points– 25– 17– 26– 23
Tensile strength, Mpa– 75– 68– 58– 44
Elongation at break, %– 32– 25

– 53

– 31
Variation in volume, %+ 60+ 50+ 44+ 37
从生产日期开始产品BLUESIL ADD 720保质 18个月请查看安全数据表欧盟《报废车辆指令》;重金属;欧盟《电气、电子设备中限制使用某些有害物质指令》;欧盟《报废电子电气设备指令》

BLUESIL ADD 720

Ivory coloured paste.

保护

高温胶添加剂

硅浆

欧盟《报废车辆指令》;重金属;欧盟《电气、电子设备中限制使用某些有害物质指令》;欧盟《报废电子电气设备指令》

BLUESIL ADD 720 is an agent designed to improve the resistance of heat cured silicone elastomers to ASTM Oil n° 1, 2 and 3 and to motor oils, both for short and prolonged periods.

亚太区;欧洲中东非洲;中南美;北美

 Characteristics_A

 

 

密度1.63Monocompg/cm3

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

Rubber General Guidehttps://silicones.elkem.com/ZH/Our_offer/KEC/ListInstance_Brochure_Title/RubberGeneralGuide_Brochure.pdfRubber General Guide

 TDS