The anti-adherent treatment should be applied to surfaces which have been cleaned and degreased or even sanded and then dried.
The application is done with a brush, a pad or a spray gun after diluting the product as supplied in a solvent or a solvent mixture.
The coating applied in then allowed to air dry to evaporate the most part of the solvents, then heated progressively and kept at about 200- for 1 hour.
The thermal treatment may be brought back to about 15 min at by addition of 10 % of BLUESIL SICCATIF 15 (compared with the product as supplied) to the treatment mixture.

BLUESIL RES 20B 83 % 储存温度要介于 -20 °C/ -4 °F 和 30 °C/ 86 °F 之间,从生产日期开始产品保质 12 个月请查看安全数据表欧盟《报废车辆指令》;欧盟《电气、电子设备中限制使用某些有害物质指令》;挥发份;欧盟《报废电子电气设备指令》


BLUESIL RES 20B 83% is a special silicone resin supplied as an organic solution which is mainly used to provide release and anti-adherence of thermosets (epoxies, aminoplastics, pheno-plastics, polyesters...).
After application and heat-polymerisation, BLUESIL RES 20B 83% gives a dry and heat resistant film which ensures easy release and provides a good surface aspect to the parts.
BLUESIL RES 20B 83% can also be used as impregnating or varnishing of cylinder head gaskets.





BLUESIL RES 20B 83% offers the following advantages:

  • Excellent thermal stability up to 250°C: it prevents clogging of the moulds which are easily cleaned,
  • Permanent anti-adherent effect which provides multiple releases,
  • Excellent adherence on the mould surface.






粘度700MonocompNF T 76102mm2/s
干物含量83MonocompISO 3251%