BLUESIL EMUL 1803 should be diluted by adding soft water (TH < 20°), to a concentration suitable for the method of application (spray gun or pad).
The moulds must be clean when the non-adherent treatment is applied. As a general rule, one application of BLUESIL EMUL 1803 is sufficient for between two and ten uses of the mould.
The number depends on the complexity of the mould and on the material used.
|Avoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Store above freezing. Store in closed original container at temperatures between 5°C and 30°C. Suitable containers: polyethylene. Steel drums coated with epoxy-resin.||请查阅这个产品的物质安全数据表||欧盟《电气、电子设备中限制使用某些有害物质指令》|
BLUESIL EMUL 1803
A non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers.
VERY EASY AND SAFE TO USE, BECAUSE THE THINNER IS WATER
Durability of the film on the mould surface
Easy cleaning of treated moulds
The shoes industry: soles, heels, etc.
The car industry: armrests, dashboards, steering wheels, etc.