To ensure a uniform mix, the components should be re homogenized prior to use specially with TCS 7601 blue because of the high pigmentation level.
In case of hand mixing, degas the mix under vacuum 3-5 kPa before processing the product. Use preferably static mixing equipment to prevent bubbles and voids formation.
Adhesion to substrate will depend upon the curing conditions. A preliminary test is recommended to determine optimum cure conditions, and a temperature ramp-up in industrial ovens is always preferred to avoid bubbles and ensure best adhesion.
After use, packaging must be tightly closed and protected against moisture contamination to preserve its properties. When packaging has been opened, material should be used rapidly.
|BLUESIL TCS 7534 B RED may be stored at temperatures between -20°C / -4°F and 40°C / 104°F for up to 12 months from its date of manufacturing.||Please consult the Safety Data Sheet of this product.||ELV;RoHS|
BLUESIL TCS 7534 B RED
The range of BLUESIL TCS catalyst includes:
- BLUESIL TCS 7534 B (transparent)
- BLUESIL TCS 7531 B Blue
- BLUESIL TCS 7534 B Red
- BLUESIL TCS CATA 7601 Blue
Each can be used interchangeably with the products BLUESIL TCS 7513 A, BLUESIL TCS 7531 A, BLUESIL TCS 7534 A and for specific applications with BLUESIL TCS 7537 A.
Coating;Fabric Coating;Fire Protection;High Temperature Protection;Hydrophobing;Protection;UV resistant;Water Repellency
2 Part RTV
Liquid Silicone Rubber
Allows high bond strength without primer on textiles.
Low viscosity and easily pumpable to sustain high coating speed.
Allows fast cure at elevated temperature.
Allows long bath life at room temperature (>16h) when mixed with part A.
Technical textile coatings, such as coated airbags, industrial and high performance fabrics.
Asia Pacific;Europe Middle East Africa;Central and South America;North America