Product

 

 

SILBIONE LSR 4125 A may be stored for up to 12 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.Healthcare USP Class VI

SILBIONE LSR 4125 A

SILBIONE LIQUID SILICONE RUBBERS (LSRs) are two-component platinum-catalyzed silicone elastomers designed for liquid injection molding healthcare and medical devices, including applications of less than 30 day implantation in the human body.

Liquid Silicone Rubber

Liquid Silicone Rubber

Healthcare USP Class VI

  • ​Flowable and self-levelling.
  • Rapid cure at elevated temperatures.
  • Can be post-cured, but post cure is not necessary to achieve desired physical properties.

 

Asia Pacific;Central and South America;Europe Middle East Africa;North America

 Characteristics_A

 

 

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

elongation_68a5ddf2-2baf-4e60-ac6f-0a8a18a758b2elongation_68a5ddf2-2baf-4e60-ac6f-0a8a18a758b2Elongation> 350PairedMixASTM D 412%
specific-gravity_108e6684-e7c4-4e2b-a615-631b494320d3specific-gravity_108e6684-e7c4-4e2b-a615-631b494320d3Specific Gravity1.12PairedMixASTM D 792

 

 

 

 

SILBIONE LSR 4125 BSILBIONE LSR 4125 B/our_offer/Product/90061975/90061974/SILBIONE-LSR-4125-B

 

 

SILBIONE LSRs are supplied as kit-matched products. Parts A and B components are designed to be mixed with standard liquid injection molding or casting processing equipment and techniques. Airless mixing, metering and dispensing equipment are recommended.

Cure:

Cure is initiated once the two part A and part B components are mixed and can be accelerated by heating the mixed elastomer. Cure is dependent upon molding temperature and part size.

Special care must be taken to assure clean molds and a clean work area with no organic rubbers used on the same processing equipment.

Caution: Traces of foreign materials can poison the catalyst and inhibit the cure. All metering and mixing equipment should be thoroughly cleaned. Polymer systems, which contain traces of amines, sulfur, nitrogen oxide, organotin compounds and carbon monoxide can interfere with the cure of this product and should be avoided.

Note: Kit matching, accurate measuring and complete mixing are essential factors in obtaining consistent results.

​SILBIONE LSRs are supplied as kit-matched products. Parts A and B components are designed to be mixed with standard liquid injection molding or casting processing equipment and techniques. Airless mixing, metering and dispensing equipment are recommended.CureCure is initiated once the two part A and part B components are mixed and can be accelerated by heating the mixed elastomer. Cure is dependent upon molding temperature and part size.Special care must be taken to assure clean molds and a clean work area with no organic rubbers used on the same processing equipment.Caution Traces of foreign materials can poison the catalyst and inhibit the cure. All metering and mixing equipment should be thoroughly cleaned. Polymer systems, which contain traces of amines, sulfur, nitrogen oxide, organotin compounds and carbon monoxide can interfere with the cure of this product and should be avoided. Note Kit matching, accurate measuring and complete mixing are essential factors in obtaining consistent results.

 

 

SILBIONE LSRs are supplied as kit-matched products. Parts A and B components are designed to be mixed with standard liquid injection molding or casting processing equipment and techniques. Airless mixing, metering and dispensing equipment are recommended.

Cure:

Cure is initiated once the two part A and part B components are mixed and can be accelerated by heating the mixed elastomer. Cure is dependent upon molding temperature and part size.

Special care must be taken to assure clean molds and a clean work area with no organic rubbers used on the same processing equipment.

Caution: Traces of foreign materials can poison the catalyst and inhibit the cure. All metering and mixing equipment should be thoroughly cleaned. Polymer systems, which contain traces of amines, sulfur, nitrogen oxide, organotin compounds and carbon monoxide can interfere with the cure of this product and should be avoided.

Note: Kit matching, accurate measuring and complete mixing are essential factors in obtaining consistent results.

​SILBIONE LSRs are supplied as kit-matched products. Parts A and B components are designed to be mixed with standard liquid injection molding or casting processing equipment and techniques. Airless mixing, metering and dispensing equipment are recommended.CureCure is initiated once the two part A and part B components are mixed and can be accelerated by heating the mixed elastomer. Cure is dependent upon molding temperature and part size.Special care must be taken to assure clean molds and a clean work area with no organic rubbers used on the same processing equipment.Caution Traces of foreign materials can poison the catalyst and inhibit the cure. All metering and mixing equipment should be thoroughly cleaned. Polymer systems, which contain traces of amines, sulfur, nitrogen oxide, organotin compounds and carbon monoxide can interfere with the cure of this product and should be avoided. Note Kit matching, accurate measuring and complete mixing are essential factors in obtaining consistent results.

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

 TDS