Product

 

 

Bath Preparation

Components should be well mixed before use. The blend, before and after use, should be stored in appropriate conditions: closed container, with a temperature preferably below +35°C (95°F) and not exposed to light. In such conditions, a blend may be stored during several months and re-used. 

 

Curing Conditions

Both Ultraviolet light and Electron Beam curing must be carried out under oxygen-deficient atmosphere (typically below 100 ppm and preferably below 50 ppm residual O2).

 

Consult Elkem Silicones for technical assistance in the selection of appropriate photo-initiators and conditions of irradiation (power, spectrum etc…) for UV or EB processing.

 

 

Recommended formulations

 

 UV - Premium release system:       

SILCOLEASE UV POLY 11275 parts
​SILCOLEASE UV POLY 111​25 parts
​SILCOLEASE UV CATA 102 or CATA 1032 parts

 

UV - Medium release system:       

SILCOLEASE UV POLY 11250 parts
​SILCOLEASE UV POLY 111​50  parts
​SILCOLEASE UV CATA 102 or CATA 103​1-2 parts

  

Formulations may be adapted and optimised thanks to UV POLY 100 series products or acrylate organic products.

 

For low surface energy substrates (BOPP, PE film, thermal paper …), the amount of SILCOLEASE UV POLY 111 may be increased to ensure good anchorage.

 

To reduce zippiness or to improve the stability of release, SILCOLEASE UV RCA 170 may be added to SILCOLEASE UV POLY 112.

 

Warning:

Do not to store SILCOLEASE UV POLY 100 Series products and their blends in N2 environments.

 

SILCOLEASE UV POLY 112 may be stored at temperatures between -20°C / -4°F and 30°C / 86°F for up to 18 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.

SILCOLEASE UV POLY 112

SILCOLEASE UV POLY 112 silicone system is a 100% reactive release coating chemistry based on acrylate-modified silicone copolymer technology.

 

Instantaneous and complete cure is achieved by simply passing the coating under Ultraviolet (UV) light with photoinitiator SILCOLEASE UV CATA 102 or UV CATA 103 or by Electron Beam (EB) without photoinitiator.

 

SILCOLEASE UV POLY 112 can be formulated with products from Silcolease UV Poly 100 series.

Anti-mar;Non-stick;Coating;Release

Functional Fluid

  • Very long bath life.
  • Acrylate silicone chemistry giving little or no sensitivity to substrate inhibition.
  • Room temperature processing that enables coating on thermally sensitive substrates.
  • Instantaneous cure allowing for high production line speeds.
  • No need for paper re-moisturization.
  • Easy and stable release performance.
  • Wide range of release levels with addition of release modifiers.
  • Excellent subsequent adhesion.
  • No back-side transfer.

RELEASE COATING for:

  • Self-adhesive labels
  • Self-adhesive tapes
  • Low release force liners
  • Linerless labels

Asia Pacific;Central and South America;Europe Middle East Africa;North America

 Characteristics_A

 

 

Viscosity730Monocompmm2/s
Dry content99Monocomp%
AppearanceLight Green to Light BrownMonocomp

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

 TDS