SILBIONE® BIOMEDICAL ADH1 M200 is supplied as a single component adhesive
Surfaces to be bonded with adhesive should be pre-scrubbed thoroughly with a clean, soft sponge or soft-bristled brush in hot water-soap solution to remove possible surface contaminants. Do not use synthetic detergents or oil-based soaps.
Rinse with copious amounts of hot water, then rinse with distilled water and dry thoroughly. Apply SILBIONE® BIOMEDICAL ADH1 M200 adhesive and then mate the surfaces together with light pressure. A bond thickness of 0.010" minimum is recommended to achieve optimum strength. Initial cure is typically achieved in 10 minutes. Ultimate cure and optimal physical properties will be achieved after 24-120 hours at 25°C and ambient moisture.
|SILBIONE BIO ADH1 M200 may be stored for up to 18 months from its date of manufacturing.||Please consult the Safety Data Sheet of this product.|
SILBIONE BIO ADH1 M200
SILBIONE® Biomedical ADH1 M200 is a single component silicone adhesive designed specifically for applications where a high strength elastic bond to silicone, polyester, metals, polyurethane, and other substrates is needed. SILBIONE® Biomedical ADH1 M200 cures at room temperature by exposure to ambient moisture to form a tough, elastic bond. During curing, acetic acid is released as a by-product. SILBIONE® Biomedical ADH1 M200 contains no tin, solvents or plasticizers and is designed to self-level.
1 Part RTV Acetoxy
- High cohesion and adhesive strength
- Improves productivity and efficiency with fast curing
- Versatility in adhesion to many substrates, e.g., silicone, polyurethane, polyester, aluminum, titanium, etc.
- One part, ambient cure, easy to use, no need for heat or humidity
Asia Pacific;Central and South America;Europe Middle East Africa;North America