Product

 

 

CAF 7 may be stored for up to 18 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.

CAF 7

​CAF 7 is a one-component silicone elastomer that cures at room temperature:

  • ACETOXY
  • FLOWING
  • TRANSLUCENT

Adhesion;Sealing

1 Part RTV Acetoxy

Fluid

  • ​Low viscosity without dilution.
  • Does not contain solvent.
  • Could be sprayable.
  • Easy to process - Fast cure.
  • Soft material - Outstanding protection of encapsulated equipment against mechanical stress due to temperature variations and vibrations.

​CAF 7 is particularly well suited to sealing and bonding, protection and maintenance applications requiring low viscosity.

It is notably used for:

  • Encapsulation of electrical and electronic component.
  • Connector sealing.
  • Anti-slip coatings over glass substrates.

Asia Pacific;Central and South America;Europe Middle East Africa;North America

 Characteristics_A

 

 

Viscosity7 000MonocompNF T 76102mPa.s
Specific Gravity1.0MonocompDIN 53479g/cm3
Hardness19MonocompISO 868sh.A
Elongation220MonocompISO 37%
Tensile strength0.8MonocompISO 37MPa

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

​Processing is particularly easy since the product is delivered ready to use.

CAF 7 can be applied manually or by means of a spraying device.

The curing time depends on air moisture and on the thickness of the material. For certain applications, we recommend to let the material cure and release the acetic acid before closing the housing.

​Processing is particularly easy since the product is delivered ready to use. CAF 7 can be applied manually or by means of a spraying device. The curing time depends on air moisture and on the thickness of the material. For certain applications, we recommend to let the material cure and release the acetic acid before closing the housing.

 

 

​Processing is particularly easy since the product is delivered ready to use.

CAF 7 can be applied manually or by means of a spraying device.

The curing time depends on air moisture and on the thickness of the material. For certain applications, we recommend to let the material cure and release the acetic acid before closing the housing.

​Processing is particularly easy since the product is delivered ready to use. CAF 7 can be applied manually or by means of a spraying device. The curing time depends on air moisture and on the thickness of the material. For certain applications, we recommend to let the material cure and release the acetic acid before closing the housing.

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 

$Resources:BSIemotion,footer_Imageimplementations_alt;
Top

All rights reserved © Elkem Silicones 2018