Product

 

 

For more information, please download the TDS available in PDF format below.CAF 5552 MF may be stored for up to 0 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.ELV;RoHS

CAF 5552 MF

CAF 5552 MF is a non-flowing one component silicone elastomer which cures at room temperature, for bonding and assembling metal or plastic engineering components, resistant to high working temperatures, in occasional or prolonged contact with inorganic lubricants or where weather resistance is required.

It is designed for these applications which request a flexible bond even with materials having differing thermal expansion.  

  • OXIMIC Technology, MEKO (Methyl Ethyl Ketoxime) FREE
  • ADHESIVE
  • HIGH MODULUS
  • RESISTANT TO LUBRICANTS

Adhesion;Sealing;Gasketing

1 Part RTV Oxime

Paste

ELV;RoHS

  • ​Neutral system, solvent free and MEKO free
  • Strong adhesion on glass, ceramic, steel, aluminum, polyamide, polycarbonate, polyester and polyethylene terephtalate
  • Non corrosive
  • High mechanical properties (modulus, hardness, tear strength)
  • Good resistance to lubricants
  • Good heat stability: from – 50°C to + 200°C in continuous (1000 hours) and + 250°C in peak (72 hours)
  • ​Sealing car engine or machine components, transmissions, hydraulic systems and oil-bath cooled equipment such as transformers, heaters and condensers.
  • Repairing and after-market.
  • Bonding casing, beacon lights and emergency lights in externe conditions.
  • Bonding sliding, windows, fixing aerials and electronic component, assembling heating modules, encapsulating electric contacts.

Asia Pacific;Central and South America;Europe Middle East Africa;North America

 Characteristics_A

 

 

Elongation350MonocompNF ISO 37%
Extrusion rate60MonocompASTM C 1183g/min
Hardness40MonocompISO 868sh.A
Tensile strength1.6MonocompISO 37MPa

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

​CAF 5552 MF can be apply manually or by means of a pneumatic spraying device in the two following processes:

Formed In Place Gasket (FIPG, Wet gasket):

Apply a bead of CAF 5552 MF to one of the two parts to be assembled. The assembly has to be made before CAF 5552 MF has formed the skin. The curing time depends on air moisture and on the thickness of the glue.

Cured In Place Gasket (CIPG, Dry gasket):

Apply the product to one of the two parts to be assembled. Wait on the complete curing of the product before assembling the second part. In that case, it's possible to disassemble without the destruction of the silicone gasket. 

In case of reparation, remove existing gaskets with Silicone Remover. Follow the instructions of the Technical Data Sheet of this product, in order to obtain dried and cleaned surfaces before dispensing CAF 5552 MF.

​CAF 5552 MF can be apply manually or by means of a pneumatic spraying device in the two following processesFormed In Place Gasket (FIPG, Wet gasket)Apply a bead of CAF 5552 MF to one of the two parts to be assembled. The assembly has to be made before CAF 5552 MF has formed the skin. The curing time depends on air moisture and on the thickness of the glue. Cured In Place Gasket (CIPG, Dry gasket)Apply the product to one of the two parts to be assembled. Wait on the complete curing of the product before assembling the second part. In that case, it's possible to disassemble without the destruction of the silicone gasket. In case of reparation, remove existing gaskets with Silicone Remover. Follow the instructions of the Technical Data Sheet of this product, in order to obtain dried and cleaned surfaces before dispensing CAF 5552 MF.

 

 

​CAF 5552 MF can be apply manually or by means of a pneumatic spraying device in the two following processes:

Formed In Place Gasket (FIPG, Wet gasket):

Apply a bead of CAF 5552 MF to one of the two parts to be assembled. The assembly has to be made before CAF 5552 MF has formed the skin. The curing time depends on air moisture and on the thickness of the glue.

Cured In Place Gasket (CIPG, Dry gasket):

Apply the product to one of the two parts to be assembled. Wait on the complete curing of the product before assembling the second part. In that case, it's possible to disassemble without the destruction of the silicone gasket. 

In case of reparation, remove existing gaskets with Silicone Remover. Follow the instructions of the Technical Data Sheet of this product, in order to obtain dried and cleaned surfaces before dispensing CAF 5552 MF.

​CAF 5552 MF can be apply manually or by means of a pneumatic spraying device in the two following processesFormed In Place Gasket (FIPG, Wet gasket)Apply a bead of CAF 5552 MF to one of the two parts to be assembled. The assembly has to be made before CAF 5552 MF has formed the skin. The curing time depends on air moisture and on the thickness of the glue. Cured In Place Gasket (CIPG, Dry gasket)Apply the product to one of the two parts to be assembled. Wait on the complete curing of the product before assembling the second part. In that case, it's possible to disassemble without the destruction of the silicone gasket. In case of reparation, remove existing gaskets with Silicone Remover. Follow the instructions of the Technical Data Sheet of this product, in order to obtain dried and cleaned surfaces before dispensing CAF 5552 MF.

 NeedAnExpert

 

 

 

 

 CS

 

 

New generation MEKO-free oxime bonding and sealing productshttps://silicones.elkem.com/EN/Our_offer/KEC/Pages/Case-Studies/Meko-Free.aspxNew generation MEKO-free oxime bonding and sealing products

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

 TDS