Product

 

 

BLUESIL TCS 7521 A may be stored for up to 6 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.

BLUESIL TCS 7521 A

Bluesil™ TCS 7521 A/B is a two-component polyaddition heat cured liquid silicone elastomer. All products from the Textile Coating System product line are specially engineered for textile coating applications.

Coating;Fabric Coating;Heat Protection;High Temperature Protection;Protection;UV resistant

2 Part RTV

Liquid Silicone Rubber

• Thermal and Fire Resistant

• Excellent Adhesion to Glass Fibers 

• Fast Cure at Elevated Temperatures

• Long Bath Life at Room Temperature

• Durable Protective Coating

• Solventless Technology

​• Airbag Coatings

• Industrial Fabrics and Belts

• Commercial Protective Coatings

North America

 Characteristics_A

 

 

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

BLUESIL TCS 7521 BBLUESIL TCS 7521 B/our_offer/Product/90059765/90059763/BLUESIL-TCS-7521-B

 

 

​• Some fillers may settle during transport and storage. The Part A and Part B should be thoroughly mixed prior to use

​• When mixing by hand, place material under vacuum (3-5 kPa) to degas

​• Static mixing equipment is preferred to ensure uniform mix and prevent formation of bubbles

​• Adhesion to substrate will depend upon the curing conditions. A preliminary test is recommended to determine optimum cure conditions per industrial process

​• Curing inhibition may occur if material is in contact with the following: materials containing tin salts, amines, or sulfur

​• After use, packaging must be tightly closed and protected against moisture contamination to preserve its properties. When packaging has been opened, material should be used immediately

​• Some fillers may settle during transport and storage. The Part A and Part B should be thoroughly mixed prior to use​• When mixing by hand, place material under vacuum (3-5 kPa) to degas​• Static mixing equipment is preferred to ensure uniform mix and prevent formation of bubbles​• Adhesion to substrate will depend upon the curing conditions. A preliminary test is recommended to determine optimum cure conditions per industrial process​• Curing inhibition may occur if material is in contact with the following materials containing tin salts, amines, or sulfur​• After use, packaging must be tightly closed and protected against moisture contamination to preserve its properties. When packaging has been opened, material should be used immediately

 

 

​• Some fillers may settle during transport and storage. The Part A and Part B should be thoroughly mixed prior to use

​• When mixing by hand, place material under vacuum (3-5 kPa) to degas

​• Static mixing equipment is preferred to ensure uniform mix and prevent formation of bubbles

​• Adhesion to substrate will depend upon the curing conditions. A preliminary test is recommended to determine optimum cure conditions per industrial process

​• Curing inhibition may occur if material is in contact with the following: materials containing tin salts, amines, or sulfur

​• After use, packaging must be tightly closed and protected against moisture contamination to preserve its properties. When packaging has been opened, material should be used immediately

​• Some fillers may settle during transport and storage. The Part A and Part B should be thoroughly mixed prior to use​• When mixing by hand, place material under vacuum (3-5 kPa) to degas​• Static mixing equipment is preferred to ensure uniform mix and prevent formation of bubbles​• Adhesion to substrate will depend upon the curing conditions. A preliminary test is recommended to determine optimum cure conditions per industrial process​• Curing inhibition may occur if material is in contact with the following materials containing tin salts, amines, or sulfur​• After use, packaging must be tightly closed and protected against moisture contamination to preserve its properties. When packaging has been opened, material should be used immediately

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

Technical Textileshttps://silicones.elkem.com/EN/Our_offer/KEC/Pages/Brochures/Technical-Textiles.aspxTechnical Textiles

 TDS