Product

 

 

​SILCOLEASE PSA 408 is supplied at high solid content and high viscosity. It can be used as such or be diluted by addition of an appropriate aromatic solvent such as toluene or xylene.

To achieve optimum properties, the addition of an organic catalyst is recommended (benzoyl peroxide* - premixed to 50% - added at a concentration of 0,5 to 3% relative to SILCOLEASE PSA 408) The adhesive properties depend on the curing conditions used; they are generally of around a few minutes at temperatures of 130 - 200°C .

For some substrates, if the bond between SILCOLEASE PSA 408 and substrate is not adequate, SILCOLEASE PSA PRIMER 409, which is very effective and compatible to SILCOLEASE PSA 408, is recommended to improve the bonding.

SILCOLEASE PSA 408 may be stored at a temperature between -5 °C/ 23 °F and 30 °C/ 86 °F for up to 12 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.

SILCOLEASE PSA 408

​SILCOLEASE PSA 408 is a silicone pressure sensitive adhesive (PSA) used in coating films and fabrics for the production of high performance pressure sensitive tapes. It's a compounded solution of polydimethyl siloxane gum and resin diluted in toluene.

Adhesion;Coating;Heat Protection;High Temperature Protection

PSA

Fluid

  • ​Excellent performance in terms of tackiness and peel

  • Good temperature performances

  • A moderate viscosity fits for textile coating

  • Moisture and ageing resistance

  • Improved production efficiency( high cure speed)

  • ​Masking tape

  • Electrical tape

  • Splicing tape

Asia Pacific;Europe Middle East Africa;Central and South America;North America

 Characteristics_A

 

 

Dry content60Monocomp%
Viscosity80000MonocompmPa.s

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

 TDS