Product

 

 

SILCOLEASE POLY 365 is formulated with addition of a catalyst, for example SILCOLEASE CATA 12070, a crosslinker, for example SILCOLEASE XL 325 and if necessary a release control additive, for example SILCOLEASE RCA 395.

Recommended formulation, typical:

SILCOLEASE POLY 365.......................................................................... 100 parts
SILCOLEASE XL 325....................................................................... 4.0 to 6.0 parts
SILCOLEASE CATA 12070 ................................................................1.5 to 3.0 parts

Bath preparation:

It is recommended to mix the products while stirring in the following order:

Mix together thoroughly SILCOLEASE POLY 365 and SILCOLEASE XL 325 before adding the SILCOLEASE CATA 12070 and completely mixing to a fully homogeneous blend. A slightly cloudy appearance to the bath is normal and has no detrimental effect on the coating.

Ideally, SILCOLEASE RCA 395, when needed, is initially mixed with the SILCOLEASE XL 325, followed by SILCOLEASE POLY 365. Mix these together thoroughly before finally adding SILCOLEASE CATA 12070 and completely mixing to a fully homogeneous blend.

Warning: SILCOLEASE CROSSLINKER and SILCOLEASE CATALYST may react violently together and therefore must not be blended together separate from the other system components.

SILCOLEASE POLY 365 may be stored for up to 24 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.Heavy Metals

SILCOLEASE POLY 365

SILCOLEASE POLY 365 is a solventless silicone polymer used for RELEASE COATING of PAPERS, FILMS and various substrates.

It has been especially designed to give excellent cure performance with Optima Concept components allowing lower temperature cure or reduced catalyst levels.

Coating;Non-stick;Release

Vinyl Functional Fluid

Fluid

Heavy Metals

  • Premium easy release levels
  • Excellent cure at high coating line speeds with low Pt levels (25 – 50 ppm)
  • Can cure on thermally sensitive substrates, LTC performance
  • Release properties well adapted to different adhesive types and various modes of adhesive coating
  • Rising release profile with speed
  • Wide range of release levels with addition of release modifiers
  • Good bath stability 

RELEASE COATING for:

  • Self-adhesive labels (particularly for graphic arts and medical grades)
  • Other self-adhesive protectors (envelopes, personal care)
  • Self-adhesive tapes

 

Asia Pacific;Europe Middle East Africa;Central and South America;North America

 Characteristics_A

 

 

ColorColourlessMonocomp
Active material content100Monocomp%
Specific Gravity0.97Monocomp
Viscosity650MonocompmPa.s
Flash point>200Monocomp°C
Volatile Content< 0.75MonocompASTM D 5095%
Turbidity< 7MonocompDIN 53479NTU

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

Silcolease® Silicone Release Coatingshttps://silicones.elkem.com/EN/Our_offer/KEC/Pages/Brochures/Silcolease.aspxSilcolease® Silicone Release Coatings

 TDS