Product

 

 

Leave the container of LYNDCOAT BR 2512 open to vent for approximately 30 minutes before use. This allows for an exchange with the outside atmosphere and reduces problems due to electrostatic discharge risks that may typically arise when introducing the pumping equipment.

It is best to use grounded electrically conductive Polypropylene and/or rubber tubes for pumping of LYNDCOAT BR 2512. Do not use any uncoated metal tubing.

Membrane pumps are best suited for use with LYNDCOAT BR 2512. In any case it is best to use pumps with chambers made of stainless steel or non-metal materials.

1- Bladder treatment

New bladders should be clean and uncontaminated, otherwise, improper bonding of the coating will occur and its effectiveness will be reduced.

It is best to apply LYNDCOAT BR 2512 to the new bladder before mounting on the press.

Use a light spray, take care to ensure that the exposed surface is fully covered, but do not apply excessive quantities as they may then level out the structure of the bladder surface intended to promote air bleed.

Leave the bladder suspended to dry at ambient temperature in a clean dust-free area.

The pre-coated bladder should be heated before use. This may be achieved during usual preheating procedures on the press. The bladder is then ready to use.

2- Application on the green tire inner liner

The clean inner liner of the green tire should be sprayed, manually with a spray gun or automatically in a spray cabin, with LYNDCOAT BR 2512.

For best results use fine nozzle diameters (0.8 – 1.2mm) with compressed air spray systems. Airless spray is also possible, for example with a 515 nozzle (0,38mm).

LYNDCOAT BR 2512 may also be applied with a sponge. Take care not to apply excessive amounts of product.

The water will quickly evaporate and leave a slightly grey release layer on the inside of the green tire.

The treated tires may then be used immediately. They should not be stored for longer periods (> 48 h) due to the risk of dust deposit on the release layer.

During tire curing in the press the LYNDCOAT BR 2512 layer will be partially transferred from the inner liner to the surface of the curing bladder thereby replenishing the multi release layer on the bladder.

A) When starting up with a new untreated bladder at least the first two green tires should be treated with LYNDCOAT BR 2512 before curing to allow a sufficient release layer to build on the bladder surface.

Then cure 1 treated tire for every up to 23 untreated tires (1 in 24) or whatever frequency has been found to work best in your conditions.

B) When starting up with a new treated bladder (recommended) the first or second green tire should be treated with LYNDCOAT BR 2512 before curing.

Then cure 1 treated tire for every up to 23 untreated tires (1 in 24) or whatever frequency has been found to work best in your conditions.

3- Application on the bladder

LYNDCOAT BR 2512 may also be applied directly to the bladder surface.

Start with a treated bladder mounted on the press.

The pre-coated bladder should be heated before use. This may be achieved during usual preheating procedures on the press. The bladder is then ready to use.

Replenish the release layer by spraying, painting or swabbing the bladder with fresh LYNDCOAT BR 2512 after up to every 24th cured tire or with whatever frequency has been found to work best in your conditions.

LYNDCOAT BR 2512 may be stored at a temperature between 2 °C/ 36 °F and 30 °C/ 86 °F for up to 9 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.ELV;RoHS

LYNDCOAT BR 2512

LYNDCOAT BR 2512 is a solvent free, silicone based, ready to use, bladder release agent.
Applied on the inside of the green tire, or directly on the bladder, it combines particularly long lasting multi release and slip with exceptional air bleed performance.

Anti-blocking;Coating;Lubrication;Non-stick;Primer;Protection;Release;Slip

Emulsion

Emulsion

ELV;RoHS

LYNDCOAT BR 2512 is water based and does not contain solvents. It is easy to use and does not require dilution.

It can be swabbed or sprayed onto the rubber surface of the green tire inner liner or painted directly onto the bladder.

LYNDCOAT BR 2512 is a white / grey aqueous emulsion that quickly dries at ambient and cures to a multi release coating which promotes excellent & durable slip, multi-release and air bleed performance.

It is designed for all kind of butyl rubber bladders typically used in PC (standard and UHP), light truck and truck/bus tire curing presses. It is also used in MPT and Agro/Farm tire production processes.

Its durability and high slip performance makes it the multi release agent of choice for processes where high frictions occur between rubber surfaces, but also between rubber and metal surfaces.

It remains effective through a high number of curing cycles. The number of cycles between applications depends on application efficiency, curing time, curing temperature, tire construction and composition, bladder design, composition and condition.

LYNDCOAT BR 2512 has shown to be very efficient. Thin layers give best results, making it economic in operation.

LYNDCOAT BR 2512 multi release agent has shown to increase productivity, reduce defect rates & press downtimes, prolong bladder life and reduce costs.

Asia Pacific;Europe Middle East Africa;Central and South America;North America

 Characteristics_A

 

 

Viscosity1700MonocompcP
pH5.25MonocompISO 976
AppearanceWhite / grey emulsionMonocomp

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 

 

 CS

 

 

Silicone Release Agents Reduce Costs https://silicones.elkem.com/EN/Our_offer/KEC/Pages/Case-Studies/Silicone-Release-Agents-Reduce-Costs.aspxSilicone Release Agents Reduce Costs
LYNDCOAT™ BR2205 - a clean operation inside painthttps://silicones.elkem.com/EN/Our_offer/KEC/Pages/Case-Studies/LYNDCOAT™-BR2205.aspxLYNDCOAT™ BR2205 - a clean operation inside paint

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

Lyndcoat® Tire releasehttps://silicones.elkem.com/EN/Our_offer/KEC/Pages/Brochures/Lyndcoat®-Tire-release.aspxLyndcoat® Tire release

 TDS

 

 

 

 

 

 

LYNDCOAT BR 1211LYNDCOAT BR 1211/our_offer/Product/90058571/_/LYNDCOAT-BR-1211
LYNDCOAT BR 1214LYNDCOAT BR 1214/our_offer/Product/90060029/_/LYNDCOAT-BR-1214
LYNDCOAT BR 2100 RTULYNDCOAT BR 2100 RTU/our_offer/Product/90006669/_/LYNDCOAT-BR-2100-RTU
LYNDCOAT BR 2204 E4LYNDCOAT BR 2204 E4/our_offer/Product/90060841/_/LYNDCOAT-BR-2204-E4
LYNDCOAT BR 2511 RTULYNDCOAT BR 2511 RTU/our_offer/Product/90039362/_/LYNDCOAT-BR-2511-RTU
LYNDCOAT MR 5100 RTULYNDCOAT MR 5100 RTU/our_offer/Product/90031421/_/LYNDCOAT-MR-5100-RTU