RTV 3122 tends to settle during storage, and must be rehomogenised before use. This should be done directly in the original container, either by hand with a spatula, or mechanically with a stirrer.

Be taken to entrap carefully with little air when the catalyst is added, as it would cause bubbles in  the finished product. It is therefore advisable to degas the mixture under a vacuum of 30 to 50 mbar in three to five minutes, applying the vacuum twice in the chamber.  Degassing is quicker in a container with a high diameter: height ratio.

3.Cross linking
At 23°C RTV 3122 will cure in 15h. In order to achieve the best possible performance levels, it is preferable to wait for 72 h before using them.

No special storage precautions noted. Material is stable under normal conditions. Avoid contact with oxidizing agents. For further information, refer to Section 10: "Stability and Reactivity". Use container made of: Suitable plastic material.Please consult the Safety Data Sheet of this product.


Bluesil RTV 3122 + 2% Catalyst 68 is a silicone elastomer with two components, crosslinking at room temperature by a polycondensation reaction.


2 Part RTV


  • Antistatic property for protection from dusts
  • Good tear strength for lasting durability
  • Good ink adsorption and transfer properties
  • Tampography

Asia Pacific

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.




Viscosity< 60000MonocompNF T 76102mPa.s
Gel time40MonocompNF T 77 - 107min
Hardness24MonocompISO 868sh.A
ColorWhite to off-whiteMonocomp
Tear strength> 16MonocompASTM D 624N/mm











































All rights reserved © Elkem Silicones 2018