STORAGE -20°C Avoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Avoid contact with oxidizing agents. Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.


Silcolease® POLY 11365 polymer is a low vinyl content silicone fluid which, when properly catalyzed and cured, gives a flexible crosslinked coating with premium release properties. The Silcolease® POLY 11365 release coating system is comprised of a vinyl silicone polymer, a methyl hydrogen siloxane crosslinker and a platinum catalyst. The resulting addition reaction is very rapid and therefore an inhibitor is included to provide bath stability at ambient conditions while allowing rapid cures at elevated temperatures.


Vinyl Functional Fluid


• Premium Release at low strip speeds

• Increasing release at higher strip speeds

• Low temperature cures for thermally sensitive substrates

• Good cures at high coating line speeds

• Excellent bath stability

• Anchorage to both paper & film substrates

• Wide range of release levels with addition of release modifiers

North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.




Specific Gravity0.97Monocomp
Active material content100Monocomp%
Flash point>166Monocomp°C
Dry content99.5MonocompISO 3251%
AppearanceClear, nearly colorless liquidMonocomp
Cure rateIn specificationMonocomp












































All rights reserved © Elkem Silicones 2018