Product

 

 

SILCOLEASE POLY 369 is used with addition of a catalyst, for example SILCOLEASE CATA 12070, a crosslinker, for example SILCOLEASE CROSSLINKER 321 and if necessary a release control additive, for example SILCOLEASE RCA 395.

Recommended formulation, typical:

SILCOLEASE POLY 369.............................................................. 100 parts

SILCOLEASE CROSSLINKER 321..................................... 8.5 to 10.5 parts

SILCOLEASE CATA 12070................................................... 1.5 to 3.5 parts

Bath preparation:

It is recommended to mix the products while stirring in the following order:

SILCOLEASE POLY 369 and SILCOLEASE CROSSLINKER 321; mix these together thoroughly before finally adding SILCOLEASE CATA 12070 and completing mixing to a fully homogeneous blend.

Ideally, SILCOLEASE RCA 395, when needed, is initially mixed with the SILCOLEASE CROSSLINKER 321, followed by SILCOLEASE POLY 369. Mix these together thoroughly before finally adding SILCOLEASE CATA 12070 and completing mixing to a fully homogeneous blend.

Warning: SILCOLEASE CROSSLINKER and SILCOLEASE CATALYST may react violently together and therefore must not be blended together separate from the other system components.

SILCOLEASE POLY 369 may be stored for up to 24 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.Heavy Metals

SILCOLEASE POLY 369


SILCOLEASE POLY 369 is a solventless silicone polymer used for RELEASE COATING OF PAPERS, FILMS and various substrates.

It has been especially designed to give excellent performance on demanding high speed labelling applications needing a flat release profile.

Combined with other components from the Optima range SILCOLEASE POLY 369 can be coated at lower temperatures than traditional systems or use lower Pt levels.

Excellent performance on CCK papers combined with low coefficient of friction makes this polymer a good choice for many graphics applications.

Coating;Non-stick;Release

Vinyl Functional Fluid

Fluid

Heavy Metals

 

  • Premium flat release over a broad range of peeling speeds,
  • Good cure at high coating line speeds,
  • Anchors to most substrates,
  • Wide range of release levels with addition of release modifiers,
  • Excellent bath stability,
  • Low coefficient of friction.

 

RELEASE COATING for:

  • Self-adhesive labels (particularly for graphic arts and high speed dispensing),
  • Other self-adhesive protectors (envelopes, personal care),
  • Self-adhesive tapes.

 

Asia Pacific;Europe Middle East Africa;Central and South America;North America

 Characteristics_A

 

 

Volatile Content< 1MonocompISO 3251%
Color< 20MonocompHAZEN
Turbidity< 7MonocompDIN 53479NTU
Viscosity247.5MonocompNF T 76102mm2/s

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 

$Resources:BSIemotion,footer_Imageimplementations_alt;
Top

All rights reserved © Elkem Silicones 2018