Product

 

 

SILBIONE LSR SELECT ™ 70 may be stored for up to 12 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.

SILBIONE LSR SELECT ™ 70

SILBIONE® LSR 70 is a 70 Shore A durometer, two-component platinum-catalyzed healthcare grade silicone elastomer designed for injection or compression molding of high strength parts or over-molding onto other silicone molded parts.

Bio-compatibility

Liquid Silicone Rubber

Fluid

 

  • Translucent
  • High tear strength
  • Bonds to silicone substrates without a primer
  • Effective as an over-molding product
  • No post cure is needed

 

  • Molded medical applications of < 29 day implantation
  • Precision molded parts
  • Catheter strain relief junctions
  • Encapsulated electronic parts
  • Insert molding
  • Needle septum ports

Central and South America;North America

 Characteristics_A

 

 

Elongation> 350MonocompISO 37%

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

​Parts A and B components of SILBIONE® LSR 70 are designed to be mixed in equal parts using standard liquid injection molding processing equipment and techniques. Airless mixing, metering and dispensing equipment are recommended for production operations. Accurate measuring and complete mixing are essential factors in obtaining consistent results.

​Parts A and B components of SILBIONE® LSR 70 are designed to be mixed in equal parts using standard liquid injection molding processing equipment and techniques. Airless mixing, metering and dispensing equipment are recommended for production operations. Accurate measuring and complete mixing are essential factors in obtaining consistent results.

 

 

​Parts A and B components of SILBIONE® LSR 70 are designed to be mixed in equal parts using standard liquid injection molding processing equipment and techniques. Airless mixing, metering and dispensing equipment are recommended for production operations. Accurate measuring and complete mixing are essential factors in obtaining consistent results.

​Parts A and B components of SILBIONE® LSR 70 are designed to be mixed in equal parts using standard liquid injection molding processing equipment and techniques. Airless mixing, metering and dispensing equipment are recommended for production operations. Accurate measuring and complete mixing are essential factors in obtaining consistent results.

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 

$Resources:BSIemotion,footer_Imageimplementations_alt;
Top

All rights reserved © Elkem Silicones 2018