Product

 

 

Silbione®  LSR SELECTTM products are supplied as individual component materials.  These are intended to be used in conjunction with Silbione® LSR SELECTTM CONTROL and Silbione®   LSR SELECTTM CATA.  These components must be mixed with specialized, but readily available dosing systems.  The molder can control the dosing of Silbione®   LSR SELECTTM CONTROL and Silbione® LSR SELECTTM CATA to achieve a faster curing material.

Cure:

Cure does not begin until the Silbione®   LSR SELECTTM CATA is introduced into the stream of material. Addition of Silbione®   LSR SELECTTM CONTROL will determine the necessary cure time.

Shut Down:

To shut down, immediately stop any further incorporation of Silbione®  LSR SELECTTM CATA.  If the level of Silbione®  LSR SELECTTM CONTROL has been less than 6%, simultaneously increase it to at least 6%.  Continue molding until parts lack the ability to cure well.  At this point some additional purging of the barrel and cold runner may be necessary.

SILBIONE LSR SELECT ™ 50 may be stored for up to 24 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.

SILBIONE LSR SELECT ™ 50

Silbione® LSR SELECTTM is a patented, advanced system of materials designed to enhance the operation, control, flexibility, and productivity of LSR molding processes.

Silbione® LSR SELECTTM platinum-catalyzed silicone elastomers are designed for liquid injection molding and designed for manufacturing precision molded parts for industrial, consumer, and automotive applications.  They may also be used for overmolding onto other polymers.   Silbione® LSR SELECTTM  materials must be used in conjunction with curing additives to achieve rapid cure. 

Available in a range of hardnesses from 20 to 70 durometer – Shore A, Elkem Silicones' Silbione® LSR SELECTTM materials offer the same distinctive advantages of easy processing and release as our 2 part LSR products.  In addition, this proven system gives you CONTROL to optimize your cure kinetics improving productivity and flexibility to achieve your precise results. Now you can also create a repeatable, unique and precise durometer blend, as well as expand your range of applications for low temperature cure.  With Silbione®  LSR SELECT™, you CONTROL your destiny.

Bio-compatibility

Liquid Silicone Rubber

Fluid

  • ​Improved productivity through controlled cure initiation resulting in time and money savings
  • Increase in part acceptance using better process controls
  • Better control over unique and precision hardness through material blending
  • Enhanced productivity due to reduced downtime for purging and cleaning
  • Optimization of capital investments with a shorter cycle time resulting in increased capacity per press
  • Enhanced range of applications for low temperature molding and overmolding

Central and South America;North America

 Characteristics_A

 

 

Specific Gravity1.1MonocompASTM D 792
Elongation> 350MonocompASTM D 412%

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

 TDS