SILBIONE MED ADH 4300 RTV is a ready to use product. Surfaces to be bonded with adhesive should be pre-scrubbed thoroughly with a clean, soft sponge or soft-bristled brush in hot water-soap solution to remove possible surface contaminants. Do not use synthetic detergents or oil-based soaps. Rinse with copious amounts of hot water, then rinse with distilled water and dry thoroughly. Apply SILBIONE MED ADH 4300 RTV adhesive and then mate the surfaces together with light pressure. A bond thickness of 0.010" minimum is recommended to achieve optimum strength. Partial cure is typically achieved in 20 minutes. Ultimate cure and optimal physical properties will be achieved after 24-120 hours at 25°C and ambient moisture.
|SILBIONE MED ADH 4300 may be stored for up to 24 months from its date of manufacturing.||Please consult the Safety Data Sheet of this product.|
SILBIONE MED ADH 4300
SILBIONE MED ADH 4300 RTV is a single component silicone adhesive designed for medical applications where a high strength elastic bond to silicone, polyester and other substrates is needed. SILBIONE MED ADH 4300 RTV cures at room temperature by exposure to ambient moisture to form a tough, elastic bond. During curing, acetic acid is released as a by-product. SILBIONE MED ADH 4300 RTV contains no solvents or plasticizers and is designed to exhibit high thixotropy in thin sections, but self level in thick sections.
1 Part RTV Alcoxy
• Very high bond strength
• Cures at room temperature
• Ready-to-use, easy to apply
• Medical (<30 day implantable)
• Bonding unlike substrates
Asia Pacific;Europe Middle East Africa;Central and South America;North America