Product

 

 

SILBIONE HCRU 4160 HC may be stored for up to 24 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.

SILBIONE HCRU 4160 HC

Silbione HCRA 4160 A/B HC is a two-part, addition-cure, platinum catalyzed silicone elastomer designed for use in processes where high strength molded parts or extruded profiles are desired. It is formulated for fast cure in transfer and compression molds and in short-dwell vulcanizing ovens for extrusion processes. Silbione HCRA 4160 A/B HC meets USP Class VI requirements and can be used in short term (under 30 days) implant materials.

Bio-compatibility

Custom Compound HCR

 

  • No volatile cure by-products
  • Optional post cure
  • Non-tacky surface
  • Non-blooming
  • No peroxide residue
  • ​Molded or extruded medical parts for <30 day implantation
  • Healthcare applications: stoppers, plungers, seals, needle entry ports, peristaltic pump tubing

Asia Pacific;Europe Middle East Africa;Central and South America;North America

 Characteristics_A

 

 

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

​Parts A and B components of Silbione HCRA 4160 A/B HC are designed to be mixed in equal parts by weight or volume using standard rubber processing techniques such as two roll milling. For optimum results, freshen both parts separately on the two roll mill before mixing them. Do not allow the material temperature to exceed 30°C during the milling. The mixed material should be used within two hours to prevent structuring and premature crosslinking. Molding is typically 10 minutes at 120°C or 3 minutes at 165°C.

Curing can be achieved in 10 minutes at 120°C. Post curing for one hour at 165°C is recommended to stabilize physical properties. For extrusion applications, cure for 3 seconds at 593°C

The mixture of Parts A and B components of Silbione® HCRA 4160 A/B HC will remain stable for at least 6 hours at 23°C. Working time can be further extended by storing the mixed material in a freezer.

Care must be taken to work in a clean area with clean equipment, as traces of foreign materials can poison the catalyst, and inhibit the cure.

Accurate measuring and complete mixing are essential in obtaining consistent results. Contamination by trace amounts of compounds containg sulfur, amines and organometallic salts can result in an unreliable cure of the material. Never handle this material with latex gloves. Organic rubbers and tin catalyzed silicones often contain compound which can interfere with the cure of teis material and should be avoided.

​Parts A and B components of Silbione HCRA 4160 A/B HC are designed to be mixed in equal parts by weight or volume using standard rubber processing techniques such as two roll milling. For optimum results, freshen both parts separately on the two roll mill before mixing them. Do not allow the material temperature to exceed 30°C during the milling. The mixed material should be used within two hours to prevent structuring and premature crosslinking. Molding is typically 10 minutes at 120°C or 3 minutes at 165°C. Curing can be achieved in 10 minutes at 120°C. Post curing for one hour at 165°C is recommended to stabilize physical properties. For extrusion applications, cure for 3 seconds at 593°C The mixture of Parts A and B components of Silbione® HCRA 4160 A/B HC will remain stable for at least 6 hours at 23°C. Working time can be further extended by storing the mixed material in a freezer. Care must be taken to work in a clean area with clean equipment, as traces of foreign materials can poison the catalyst, and inhibit the cure. Accurate measuring and complete mixing are essential in obtaining consistent results. Contamination by trace amounts of compounds containg sulfur, amines and organometallic salts can result in an unreliable cure of the material. Never handle this material with latex gloves. Organic rubbers and tin catalyzed silicones often contain compound which can interfere with the cure of teis material and should be avoided.

 

 

​Parts A and B components of Silbione HCRA 4160 A/B HC are designed to be mixed in equal parts by weight or volume using standard rubber processing techniques such as two roll milling. For optimum results, freshen both parts separately on the two roll mill before mixing them. Do not allow the material temperature to exceed 30°C during the milling. The mixed material should be used within two hours to prevent structuring and premature crosslinking. Molding is typically 10 minutes at 120°C or 3 minutes at 165°C.

Curing can be achieved in 10 minutes at 120°C. Post curing for one hour at 165°C is recommended to stabilize physical properties. For extrusion applications, cure for 3 seconds at 593°C

The mixture of Parts A and B components of Silbione® HCRA 4160 A/B HC will remain stable for at least 6 hours at 23°C. Working time can be further extended by storing the mixed material in a freezer.

Care must be taken to work in a clean area with clean equipment, as traces of foreign materials can poison the catalyst, and inhibit the cure.

Accurate measuring and complete mixing are essential in obtaining consistent results. Contamination by trace amounts of compounds containg sulfur, amines and organometallic salts can result in an unreliable cure of the material. Never handle this material with latex gloves. Organic rubbers and tin catalyzed silicones often contain compound which can interfere with the cure of teis material and should be avoided.

​Parts A and B components of Silbione HCRA 4160 A/B HC are designed to be mixed in equal parts by weight or volume using standard rubber processing techniques such as two roll milling. For optimum results, freshen both parts separately on the two roll mill before mixing them. Do not allow the material temperature to exceed 30°C during the milling. The mixed material should be used within two hours to prevent structuring and premature crosslinking. Molding is typically 10 minutes at 120°C or 3 minutes at 165°C. Curing can be achieved in 10 minutes at 120°C. Post curing for one hour at 165°C is recommended to stabilize physical properties. For extrusion applications, cure for 3 seconds at 593°C The mixture of Parts A and B components of Silbione® HCRA 4160 A/B HC will remain stable for at least 6 hours at 23°C. Working time can be further extended by storing the mixed material in a freezer. Care must be taken to work in a clean area with clean equipment, as traces of foreign materials can poison the catalyst, and inhibit the cure. Accurate measuring and complete mixing are essential in obtaining consistent results. Contamination by trace amounts of compounds containg sulfur, amines and organometallic salts can result in an unreliable cure of the material. Never handle this material with latex gloves. Organic rubbers and tin catalyzed silicones often contain compound which can interfere with the cure of teis material and should be avoided.

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

 TDS