1. Mix Part A and Part B components according to recommended weight ratios. If power equipment is to be used, it is generally recommended to keep mixing speed at or below 350 rpm to prevent heat buildup, which can cause loss of working time and premature curing of the rubber. It is recommended that the container be filled to not more than 1/3 the container height to allow sufficient room for expansion during the deaeration procedure.

2. For these products requiring deaeration, place mixed material in a vacuum chamber and exert 29 inches Vacuum on the material. Some products will require that the vacuum be interrupted or "bumped" several times before the material crests and falls by itself. After the material has receded, keep the mixed material under full vacuum for a minimum of 15 minutes. Bleed air slowly into the chamber until atmospheric equilibrium is reached. Remove mixed and vacuumed material from the chamber. The material is now ready for pouring.

3. Some Bluestar Silicones Aerospace and Industrial products have a very long mixed pot life. Storing the mixture in a tightly sealed container at 0°F (-18°C) may extend the pot life even longer. Care should be taken when using this method to prevent moisture from condensing on the inside of cold containers and contaminating the mixture.  

Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Store in tightly closed original container. equipped with a degassing device. Suitable containers: polyethylene. Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.


BLUESILV-695 is a black, two component addition cure, flowable silicone aerospace sealant for the use as an abradable air seal for compressor blades of jet engines. BLUESILV-695 imparts high thermal stability, good machinability, long work time, and low density. It is also designed to achieve optimum properties at the specified elevated temperature cure schedule.


2 Part RTV


• Abradable air seal for the compressor blades of jet engines.

Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.







Viscosity2400PairedCompASTM D 2196Poise






hardness_cd523e03-72a3-4261-93f9-36f7bbeeafb1hardness_cd523e03-72a3-4261-93f9-36f7bbeeafb1Hardness58.5PairedMixASTM D 2240sh.A
elongation_68a5ddf2-2baf-4e60-ac6f-0a8a18a758b2elongation_68a5ddf2-2baf-4e60-ac6f-0a8a18a758b2Elongation150PairedMixASTM D 412%
specific-gravity_108e6684-e7c4-4e2b-a615-631b494320d3specific-gravity_108e6684-e7c4-4e2b-a615-631b494320d3Specific Gravity0.73PairedMixASTM D 792
tensile-strength_e61eb2e0-4dc3-47b0-a61f-b673f1b265dctensile-strength_e61eb2e0-4dc3-47b0-a61f-b673f1b265dcTensile strength262.5PairedMixSTM-6506psi





BLUESIL V-695 ABLUESIL V-695 A/our_offer/Product/90051140/90054264/BLUESIL-V-695-A































All rights reserved © Elkem Silicones 2018