Product

 

 

SILCOLEASE POLY 330 is used with addition of a catalyst, for example SILCOLEASE CATALYST crosslinker, for example SILCOLEASE CROSSLINKER and if necessary a release control additive, for example SILCOLEASE RCA 395. An anchorage additive may also be used, such as SILCOLEASE ADD 382.
Recommended formulation, typical:
SILCOLEASE POLY 330........................100 parts
SILCOLEASE ADD 382..........................2 parts
SILCOLEASE CROSSLINKER ..............8 parts
SILCOLEASE CATALYST 12070..........6 parts

Formulation Range :
Because of the range of different Polyester films that are available on the market, a formulation may be developed through experimentation that is very different from the recommended formulation above. To get good anchorage, it may be necessary to use a much higher proportion of the anchorage additive. Or, on the other hand, it may not be necessary to use any anchorage additive at all in the formulation.
Possible product ranges in a formulation are:
SILCOLEASE POLY 330...............................100 parts
SILCOLEASE ADD 382................................0 to 14 parts
SILCOLEASE CROSSLINKER..................... 0 to 14 parts
SILCOLEASE CATALYST 12070................3 to 9 parts

Bath preparation:
It is recommended to mix the products while stirring in the following order:
SILCOLEASE POLY 330, SILCOLEASE CROSSLINKER and anchorage additive SILCOLEASE ADD 382, if needed, mix these together thoroughly before finally adding SILCOLEASE CATALYST 12070 and completing mixing to a fully homogeneous blend.
Ideally, SILCOLEASE RCA 395, when needed, is initially mixed with the SILCOLEASE CROSSLINKER , followed by SILCOLEASE POLY 330 and anchorage additive SILCOLEASE ADD 382, if needed. Mix these together thoroughly before finally adding SILCOLEASE CATALYST 12070 and completing mixing to a fully homogeneous blend.

Warning: SILCOLEASE CROSSLINKER and SILCOLEASE CATALYST may react violently together and therefore must not be blended together separate from the other system components.

SILCOLEASE POLY 330 may be stored at a temperature between -20 °C/ -4 °F and 30 °C/ 86 °F for up to 24 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.Food Contact;Heavy Metals

SILCOLEASE POLY 330

SILCOLEASE POLY 330 is a solventless silicone polymer used for RELEASE COATING OF PAPERS, FILMS and various substrates.
It has been especially designed to give excellent anchorage on PET film.

Coating;Non-stick;Release

Vinyl Functional Fluid

Fluid

Food Contact;Heavy Metals

 

  • Excellent anchorage on non surface treated PET film with or without anchorage additive.
  • Excellent anchorage on various other film and paper substrates.
  • Long lasting anchorage on PET even in contact with aggressive adhesives.
  • Fast cure.
  • Non blocking.
  • Release profile suitable for most high speed label operations.

 

RELEASE COATING for:

  • Self-adhesive labels (particularly clear on clear filmic labels).
  • Other self-adhesive protectors (envelopes, personal care).
  • Self-adhesive tapes.

 

Asia Pacific;Europe Middle East Africa;Central and South America;North America

 Characteristics_A

 

 

Color< 40MonocompHAZEN
Volatile Content< 1.8MonocompASTM D 5095%
Turbidity< 7MonocompDIN 53479NTU
Viscosity1025MonocompNF T 76102mm2/s

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

 TDS