BLUESIL PRIM PM 824 is particularly easy to process because it is delivered ready to use. In all cases, it must be applied to clean, dry surfaces.

BLUESIL PRIM PM 824 is applied with a dry cloth in a thin, uniform coat. In such cases of too much quantity of primer applying, white powder appears and must be eliminated in order to avoid a bad adhesion due to hydrolysis problems; the primer must be re-applied.

After applying BLUESIL PRIM PM 824, it is recommended to wait 15 minutes minimum to leave it time to dry, at room temperature, before applying, pouring or injecting the silicone elastomer on the primer-prepared surface. Maximum waiting time before silicone elastomer’s application is 6 hours.

In order to avoid any hydrolysis problems, it is recommended not to leave the can in contact with atmospheric humidity.

STORAGE +5°C < t < +30°C IN ITS ORIGINAL PACK STIR WELL BEFORE USEAvoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Nitrogen blanketing of containers is required. Avoid contact with oxidizing agents. Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.ELV;RoHS;WEEE


BLUESIL PRIM PM 824 is an adhesion primer for room temperature vulcanising silicone elastomers: CAF one-component (and Axad), RTV-2 two-components, on a large number of substrates as glasses, metallic and plastic surfaces.





BLUESIL PRIM PM 824 is specially recommended on following substrates:
· Polar plastics materials: polyamide, polycarbonate, ABS…
· Aluminium
· Polished and unpolished Stainless Steel
· Painted steel, bi-chromated and Zinc electro-coated steels


Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.




Specific Gravity0.82Monocomp
Flash point27MonocompAFNOR T 60°C












































All rights reserved © Elkem Silicones 2018