Product

 

 

The BLUESIL TCS 7110 A has to be blended with the catalyst BLUESIL TCS 7110 B.
BLUESIL TCS 7110 A.............................................................................. 100 parts
BLUESIL TCS 7110 B catalyst................................................................ 10 parts


The blend can be further diluted with water to reach the desired viscosity and targeted coat weight.
It can be further pigmented if needed.
The pot life of the mixture at 23°C is > 16 hours.
The curing time at 150°C is about 1 minute.

Remark: Cure inhibition may occur in contact with certain materials containing tin salts, amines or sulphur. A prior spot test is recommended.


Bath preparation:
It is recommended to add dilution water, as well as other additives and pigments, under moderate agitation, then to add the catalyst with continuous agitation.
For a homogeneous blend, mixing should be energic but without air entrapment.
After use, packaging must be tightly closed and protected against moisture contamination to preserve its properties. When packaging has been opened, material should be used rapidly.

BLUESIL TCS 7110 B may be stored at a temperature between 2 °C/ 36 °F and 30 °C/ 86 °F for up to 6 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.RoHS

BLUESIL TCS 7110 B

BLUESIL TCS 7110 A&B is a two-component water-based silicone emulsion which is used for impregnation of substrates made of fibreglass, polyester, polyamide and others. This system will dry and cure upon exposure to heat.
All references from the Textile Coating System product line are developed for technical fabric applications.

Coating;Fabric Coating;Hydrophobing;Protection;UV resistant

Emulsion

Emulsion

RoHS

  • Water-based, solventless.

  • Can be processed through various coating methods and particularly adapted to impregnation processes.

  • Allows for very low add-on weight coatings (<15 g/m²).

  • High drying and curing speeds.

  • Excellent bath life.

  • Good anchorage on various substrates.

  • Easy to use for a multitude of applications.

  • Good cohesion and water repellency.

 

All types of impregnated textile substrates for:

  • Technical textiles.

  • Treated fibre-glass.

 

Europe Middle East Africa

 Characteristics_A

 

 

ColorMilky whitePairedComp
Viscosity100PairedCompmPa.s
Dry content40PairedComp%

 Characteristics_B

 

 

Viscosity150PairedCompNF T 76102mPa.s
ColorMilky whitePairedComp
Dry content54PairedComp%

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

BLUESIL TCS 7110 ABLUESIL TCS 7110 A/our_offer/Product/90030838/90050990/BLUESIL-TCS-7110-A

 

 

 

 

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

Technical Textileshttps://silicones.elkem.com/EN/Our_offer/KEC/Pages/Brochures/Technical-Textiles.aspxTechnical Textiles

 TDS