For good adhesion of the paint on the substrate, the surface to be coated first must be degreased and sandblasted.
The paint can be applied by spraying, dipping or brushing.
The coating can be handled after air drying, with full curing achieved after baking for 1 to 2 hours at 250 - .
Curing can be carried out at time of use, in which case the coating should be protected during storage, or the piece can be heat-cured immediately after application of the paint to achieve its optimum properties.
In the case of thick coatings, it is advisable to bring the temperature to 300°C in stages in order to avoid blistering.
Drying time and film thermoplasticity can be reduced by adding a catalyst such as iron octoate (ex: 0.1 to 0.5% iron octoate containing 6 % iron / solid resin.)

Avoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Nitrogen blanketing of containers is required. Avoid contact with oxidizing agents. Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.RoHS;VOC


BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution.
This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability.

Coating;Heat Protection;High Temperature Protection;Protection;Shine





  • High temperature resistance (up to 500°C) when used in combination with suitable temperature-stable fillers and pigments
  • Dry tack-free at room temperature
  • Good flexibility


Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.




Color< 50MonocompHAZEN











































All rights reserved © Elkem Silicones 2018