1. Mixing the two components
The components A and B are mixed by weight in the above indicated ratio. The mixing can be carried out either by hand or by using a low-speed electric or pneumatic mixer to minimise the introduction of air and to avoid any temperature increase.

It is also possible to use a special mixing and dispensing machine for the two silicone components. Further information is available upon request.

2. Degassing
The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing.

The silicone mixture expands to times of its initial volume and bubbles rise to the surface. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure.

Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter / height ratio.

3. Polymerisation
The system polymerises at 23°C. The curing may be slowed down at lower temperature or accelerated by heat.

Contact with certain materials can inhibit the crosslinking. See list below:

  • Natural rubbers vulcanised with sulphur.
  • RTV 2 silicone elastomers catalysed with metal salts, e.g. tin-compounds.
  • PVC stabilised with tin salts and additives.
  • Epoxy resins catalysed with amines.

In case of doubts, it is recommended to test the substrate by applying a small quantity of the mixed silicone on a restricted area.
SILBIONE RT GEL 4317 A may be stored at temperatures between -10°C / 14°F and 30°C / 86°F for up to 12 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.


SILBIONE RT GEL 4317 A&B cures into an adhesive gel which can be used in medical devices where a skin adhesive layer is needed and typically advanced wound contact layers or scar sheets.

It is validated for certain biocompatibility tests following USP Class VI / ISO 10993 and is not suitable for implantation longer than 30 days.

It is delivered as a 2-components, polyaddition curing elastomeric gel.


2 Part RTV

  • Proven biocompatibility.
  • Very good adhesion on dry skin.
  • Atraumatic removal.
  • Suitability to coating processes.
  • Wound contact layers.
  • Non-woven based dressings.
  • Adhesive tapes.
  • Adhesive sheets for medical applications.

Asia Pacific;Europe Middle East Africa;Central and South America;North America




ColorTransparent or cloudy whitePairedCompEuropean Pharmacopea




ColorTransparent or cloudy whitePairedCompEuropean Pharmacopea






penetration_a142c699-2b17-4f82-882a-75f6253332edpenetration_a142c699-2b17-4f82-882a-75f6253332edPenetration170PairedMixISO 21371/10mm
pot-life_0d649a54-7503-4c7c-a047-9d0c4b3e9f6apot-life_0d649a54-7503-4c7c-a047-9d0c4b3e9f6aPot life47.5PairedMixmin





SILBIONE RT GEL 4317 BSILBIONE RT GEL 4317 B/our_offer/Product/90038076/90038075/SILBIONE-RT-GEL-4317-B
























Silbione™ Soft Skin Adhesives™ Soft Skin Adhesives








SILBIONE RT GEL 4645 ASILBIONE RT GEL 4645 A/our_offer/Product/90061031/90061032/SILBIONE-RT-GEL-4645-A
SILBIONE RT GEL 4645 BSILBIONE RT GEL 4645 B/our_offer/Product/90061032/90061031/SILBIONE-RT-GEL-4645-B