SILCOLEASE EMULSION 912 is generally used with a catalyst, e.g. SILCOLEASE EMULSION CATALYST 913 and if required, with a release control additive, e.g. SILCOLEASE EMULSION RCA 954 combined with SILCOLEASE EMULSION XL 968 or 969.

Recommended formulation, typical:
SILCOLEASE EMULSION 912................................. 100 parts
SILCOLEASE EMULSION CATALYST 913.............6-15 parts
Diluent water ..............................sufficient for solids content > 8%
It is recommended to dilute the emulsion by adding water whilst stirring moderately and then adding the catalyst and the other co-products as required.

PROTECT FROM FREEZING STORAGE +2°C Avoid discharge into drains, water courses or onto the ground. Store in original tightly closed container. equipped with a degassing device. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures.Please consult the Safety Data Sheet of this product.Food Contact;Heavy Metals


SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates.
SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating.
The release properties of the coatings can be modified as required.

Coating;Fabric Coating;Non-stick;Release



Food Contact;Heavy Metals

Emulsion suited to coating on all types of machines, and especially on paper machines.

  • Very fast rate of cure

  • Potential to use with low catalyst levels

  • Adapted for OFF LINE or IN LINE converting

  • High catalysed bath stability


  • Adhesive protectors (envelopes, personal care, labels, etc.)

  • Industrial type backings (transfer papers, tapes, etc.)

  • Foodstuff packaging and baking.


Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.




Active material content41Monocomp%
Specific Gravity1.0Monocompg/cm3
Flash point>90Monocomp°C
pH4MonocompISO 976
Granulometry< 1Monocompµm
Dry content41MonocompISO 3251%
AppearanceMilky white liquidMonocomp











































All rights reserved © Elkem Silicones 2018