Product

 

 

BLUESIL EMUL 872RH may be stored for up to 12 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.

BLUESIL EMUL 872RH

Bluesil™ EMUL 872RH is a general purpose, non-ionic, aqueous silicone emulsion.

Emulsion

Mold release agent for technical rubber, tires, plastics & foundry products 
 Water repellent and release agent for industrial glassware 
Additive in maintenance products: floor and furniture polishes, products for leather maintenance 
Tack modifier for adhesives 
Slip additive for curable release coatings 
Antifoam in pesticide formulations (for growing crops only) 

North America

 Characteristics_A

 

 

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

As an industrial mold release agent

Bluesil™ EMUL 872RH is generally used diluted at concentrations of 0.5 to 5.0 % active ingredients. Dilutions can be made by adding 12-120 parts of water to 1 part Bluesil™ EMUL 872RH with moderate mechanical stirring. The reverse procedure (addition of emulsion to the water) is not recommended.

The diluted Bluesil™ EMUL 872RH must be applied to clean hot molds (up to 250°C) by spraying, brushing, or wiping with a pad.

 

In the Textile Industry

 Bluesil™ EMUL 872RH may be used as follows:

•      for softening effects as an additive to finish formulations

•      as a brightener for natural or synthetic furs. The treatment is done using spray or lick roll techniques, and drying occurs under the usual conditions. Bluesil™ EMUL 872RH gives no water repellency to the substrate.

 

The quantity of Bluesil™ EMUL 872RH used will depend upon the desired effect and properties. 

​As an industrial mold release agent Bluesil™ EMUL 872RH is generally used diluted at concentrations of 0.5 to 5.0 % active ingredients. Dilutions can be made by adding 12-120 parts of water to 1 part Bluesil™ EMUL 872RH with moderate mechanical stirring. The reverse procedure (addition of emulsion to the water) is not recommended. The diluted Bluesil™ EMUL 872RH must be applied to clean hot molds (up to 250°C) by spraying, brushing, or wiping with a pad. In the Textile Industry Bluesil™ EMUL 872RH may be used as follows • for softening effects as an additive to finish formulations • as a brightener for natural or synthetic furs. The treatment is done using spray or lick roll techniques, and drying occurs under the usual conditions. Bluesil™ EMUL 872RH gives no water repellency to the substrate. The quantity of Bluesil™ EMUL 872RH used will depend upon the desired effect and properties.

 

 

As an industrial mold release agent

Bluesil™ EMUL 872RH is generally used diluted at concentrations of 0.5 to 5.0 % active ingredients. Dilutions can be made by adding 12-120 parts of water to 1 part Bluesil™ EMUL 872RH with moderate mechanical stirring. The reverse procedure (addition of emulsion to the water) is not recommended.

The diluted Bluesil™ EMUL 872RH must be applied to clean hot molds (up to 250°C) by spraying, brushing, or wiping with a pad.

 

In the Textile Industry

 Bluesil™ EMUL 872RH may be used as follows:

•      for softening effects as an additive to finish formulations

•      as a brightener for natural or synthetic furs. The treatment is done using spray or lick roll techniques, and drying occurs under the usual conditions. Bluesil™ EMUL 872RH gives no water repellency to the substrate.

 

The quantity of Bluesil™ EMUL 872RH used will depend upon the desired effect and properties. 

​As an industrial mold release agent Bluesil™ EMUL 872RH is generally used diluted at concentrations of 0.5 to 5.0 % active ingredients. Dilutions can be made by adding 12-120 parts of water to 1 part Bluesil™ EMUL 872RH with moderate mechanical stirring. The reverse procedure (addition of emulsion to the water) is not recommended. The diluted Bluesil™ EMUL 872RH must be applied to clean hot molds (up to 250°C) by spraying, brushing, or wiping with a pad. In the Textile Industry Bluesil™ EMUL 872RH may be used as follows • for softening effects as an additive to finish formulations • as a brightener for natural or synthetic furs. The treatment is done using spray or lick roll techniques, and drying occurs under the usual conditions. Bluesil™ EMUL 872RH gives no water repellency to the substrate. The quantity of Bluesil™ EMUL 872RH used will depend upon the desired effect and properties.

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 

$Resources:BSIemotion,footer_Imageimplementations_alt;
Top

All rights reserved © Elkem Silicones 2018