Processing is particularly easy, since the products are delivered ready to use. Application can be carried out either manually or using robotic application equipment.
CAF 3 is applied to one of the two joint surfaces and assembled before the product has formed a skin.
It is recommended to apply CAF 3 to clean and dry surfaces.

SENSITIVE TO MOISTURE STORAGE +2°C Avoid discharge into drains, water courses or onto the ground. Store in tightly closed original container. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Avoid contact with oxidizing agents. Vulcanises at room temperature on contact with moisture in the air. For further information, refer to Section 10: "Stability and Reactivity". Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.RoHS;WEEE


CAF 3 is a one component, flowing silicone elastomer which cures at room temperature on contact with atmospheric humidity.
The product is :

  • Acetic.
  • Flowing.
  • Translucent.



1 Part RTV Acetoxy



CAF 3 is quick curing, has very good mechanical properties and good high temperature resistance.
CAF 3 therefore ides perfect assembly and complete sealing between different materials subject to thermal stresses.
CAF 3 also has good resistance to chemical agents.

CAF 3 is mainly used in industrial sealing and bonding applications when requiring a flowing product.
CAF 3 is notably used for:

  • Potting and insulation of electronic sensors
  • Bonding of various materials
  • General maintenance in industry


Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.




Hardness26MonocompISO 868sh.A
Viscosity140000MonocompNF T 76102mPa.s
Elongation260MonocompNF ISO 37%
Flowability< 12MonocompBOEING S 7502min
Tensile strength1.3MonocompNF ISO 37MPa


































Why bother with plastic? bother with plastic?










All rights reserved © Elkem Silicones 2018