Treatment of alkaline materials:
BLUESIL RES 4518 should be diluted to a solids content of about 6 %, by mixing about 10 litres of the product as supplied with 100 litres of thinner.
The surface for treatment should be dry and dust-free.
Apply with a brush, roller, spray gun or, preferably, an airless sprayer, until the surface is saturated.
BLUESIL RES 4518 dries rapidly in the air after application, but maximum efficacy is attained after about a week at a temperature exceeding + 5 °C.


STORAGE -20°C Avoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Avoid contact with oxidizing agents. Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.RoHS


BLUESIL RES 4518 is a methyl silicone resin, intended mainly for water-repellent treatment of buildings.
BLUESIL RES 4518 should preferably be used on moderately alkaline materials such as concrete and fibrocement. It can also be used on neutral materials such as limestone, brick, tiles and plaster.

Additive;Breathability;Coating;Hydrophobing;Primer;Protection;UV resistant;Water Repellency




Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.




Dry content71MonocompASTM D 5095%
Color< 200MonocompHAZEN
Viscosity27.5MonocompNF T 76102mm2/s











































All rights reserved © Elkem Silicones 2018