The anti-adherent treatment should be applied to surfaces which have been cleaned and degreased or even sanded and then dried.
The application is done with a brush, a pad or a spray gun after diluting the product as supplied in a solvent or a solvent mixture.
The coating applied in then allowed to air dry to evaporate the most part of the solvents, then heated progressively and kept at about 200- for 1 hour.
The thermal treatment may be brought back to about 15 min at by addition of 10 % of BLUESIL SICCATIF 15 (compared with the product as supplied) to the treatment mixture.
|BLUESIL RES 20B 83 % may be stored at a temperature between -20 °C/ -4 °F and 30 °C/ 86 °F for up to 12 months from its date of manufacturing.||Please consult the Safety Data Sheet of this product.||ELV;RoHS;VOC;WEEE|
BLUESIL RES 20B 83 %
BLUESIL RES 20B 83% is a special silicone resin supplied as an organic solution which is mainly used to provide release and anti-adherence of thermosets (epoxies, aminoplastics, pheno-plastics, polyesters...).
BLUESIL RES 20B 83% offers the following advantages:
- Excellent thermal stability up to 250°C: it prevents clogging of the moulds which are easily cleaned,
- Permanent anti-adherent effect which provides multiple releases,
- Excellent adherence on the mould surface.
After application and heat-polymerisation, BLUESIL RES 20B 83% gives a dry and heat resistant film which ensures easy release and provides a good surface aspect to the parts.
BLUESIL RES 20B 83% can also be used as impregnating or varnishing of cylinder head gaskets.
Asia Pacific;Europe Middle East Africa;Central and South America;North America