Product

 

 

Silcolease 7410 is normally formulated as a 3 component system for easy compounding and use. The standard formulation and processing (order of addition) is;

1. Dilution solvent: Quantity depends on the desired bath solids (aliphatic or aromatic)

2. Silcolease 7410: 100 parts

3. Mix thoroughly until completely dispersed (time varies with equipment)

4. Silcolease 91A: 1.0 part

5. Mix thoroughly to ensure full dispersion of the crosslinker

6. Silcolease 90B: 4 parts (maximum addition level is 6 parts)

7. Mix thoroughly to ensure full dispersion of the catalyst

It is also possible to formulate Silcolease 7410 as a multi-component system with other additives to modify cure, substrate anchorage or release performance if necessary. Details of these formulations can be provided on request.

SILCOLEASE POLY 7410 may be stored at a temperature between -20 °C/ -4 °F and 30 °C/ 86 °F for up to 12 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.Food Contact;Heavy Metals

SILCOLEASE POLY 7410

​A 3 component solvent system for Paper Release applications based on.

  • Silcolease 7410 (Polymer Solution)
  • Silcolease 91A  (Crosslinker)
  • Silcolease 90B (Catalyst)

Coating;Non-stick;Optical Transparency;Release

Gum

Fluid

Food Contact;Heavy Metals

​• 3 Component system allowing customer flexibility to self formulate

• Good cure at most suitable oven temperatures

• Low levels of silicone migration

• Good bath stability (catalyzed)

• Low and stable release values against a wide range of aggressive adhesive types

• Excellent performance for cure and anchorage on a wide range of substrates

• Low levels of silicone migration

• Good resistance to inhibition effects from a wide range of substrates

The system is designed specifically for Paper Release applications and can be coated onto a wide range of paper, film and foil substrates. The system must be diluted to a chosen concentration with a suitable solvent for coating onto the desired substrate. After application to the substrate the coating requires a short heat schedule to remove the solvent and cure the silicone.  

Asia Pacific

 Characteristics_A

 

 

ColorLightly opalescentMonocomp
Dry content30Monocomp%
Viscosity12000MonocompmPa.s
AppearanceHomogeneous liquid without impurityMonocompASTM E 2680

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

 TDS