Product

 

 

SILCOLEASE POLY 11365 E2 is used with addition of a catalyst, for example SILCOLEASE CATALYST 12070, a crosslinker, for example SILCOLEASE CROSSLINKER 12031 and if necessary a release control additive.


Recommended formulation, typical:
SILCOLEASE POLY 11365 E2........................................100 parts
SILCOLEASE CROSSLINKER 12031................................2-5 parts
SILCOLEASE CATALYST 12070.......................................4-6 parts


Bath preparation:
It is recommended to mix the products while stirring in the following order: SILCOLEASE POLY 11365 E2, SILCOLEASE CROSSLINKER 12031, mix these together thoroughly before finally adding SILCOLEASE CATALYST 12070 and completing mixing to a fully homogeneous blend.


Warning: SILCOLEASE CROSSLINKER and SILCOLEASE CATALYST may react violently together and therefore must not be blended together separate from other compounds.

SILCOLEASE POLY 11365 E2 may be stored at a temperature between -20 °C/ -4 °F and 50 °C/ 122 °F for up to 24 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.Food Contact;Heavy Metals

SILCOLEASE POLY 11365 E2

SILCOLEASE POLY 11365 E2 is a solventless silicone polymer used for release coating of papers, films and various substrates.

Coating;Non-stick;Release

Vinyl Functional Fluid

Fluid

Food Contact;Heavy Metals

  • Very fast polymerisation at low temperatures.

  • Excellent anti-adherence at high peeling speeds.

  • Release properties well adapted to different adhesive types and various modes of adhesive coating.

  • Good stability of catalysed baths

  • Excellent anchorage on the surface of various film and paper substrates. 

  • Adhesive protectors (labels, envelopes, personal care...)

  • Adhesive tapes. 

Asia Pacific;Europe Middle East Africa;Central and South America

 Characteristics_A

 

 

ColorColourlessMonocomp
Active material content100Monocomp%
Specific Gravity0.97Monocomp
Viscosity650Monocompmm2/s
Flash point>200Monocomp°C
Gel time25Monocompmin
Turbidity< 7MonocompDIN 53479NTU
Volatile Content< 0.75MonocompISO 3251%
AppearanceClear liquidMonocomp

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

 TDS