Product

 

 

SILCOLEASE POLY 11364 is formulated with addition of a catalyst, for example SILCOLEASE CATA 12070, a crosslinker, for example SILCOLEASE XL 12031 and if necessary a release control additive.


Recommended formulation, typical:
SILCOLEASE POLY 11364.................................................................... 100 parts
SILCOLEASE XL 12031............................................................................. 7 parts
SILCOLEASE CATA 12070 ......................................................................4-6 parts

Bath preparation:

It is recommended to mix the products while stirring in the following order: SILCOLEASE POLY 11364, SILCOLEASE XL 12031, mix these together thoroughly before finally adding SILCOLEASE CATA 12070 and completing mixing to a fully homogeneous blend.

Warning: SILCOLEASE CROSSLINKER and SILCOLEASE CATALYST may react violently together and therefore must not be blended together separate from other compounds.

SILCOLEASE POLY 11364 may be stored at a temperature between -20 °C/ -4 °F and 50 °C/ 122 °F for up to 24 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.Food Contact;Heavy Metals

SILCOLEASE POLY 11364

SILCOLEASE POLY 11364 is a solventless silicone polymer used for RELEASE COATING OF PAPERS, FILMS and various substrates.

Coating;Non-stick;Release

Vinyl Functional Fluid

Fluid

Food Contact;Heavy Metals

  • Excellent release against aggressive solvent based acrylic adhesives
  • Good stability of catalysed baths
  • Release properties well adapted to different adhesive types and various modes of adhesive coating
  • Excellent anchorage on the surface of various film (especially PET) and paper substrates

RELEASE COATING for:

  • Self-adhesive labels & tapes
  • Other self-adhesive protectors (envelopes, personal care)
  • Excellent release reliability & stability in composite and “pre-preg” applications

Asia Pacific;Europe Middle East Africa;Central and South America;North America

 Characteristics_A

 

 

ColorColourlessMonocomp
Active material content100Monocomp%
Specific Gravity0.97Monocomp
Flash point>200Monocomp°C
Gel time20Monocompmin
Viscosity450MonocompNF T 76102mm2/s
Volatile Content< 1MonocompISO 3251%
AppearanceClear to almost clear liquidMonocomp

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 

$Resources:BSIemotion,footer_Imageimplementations_alt;
Top

All rights reserved © Elkem Silicones 2018