Processing is particularly easy since the product is delivered ready to use. Application can be carried out either manually or using robotized application equipment.
The bead of CAF 22 OX is applied to one of the two joint surfaces. Assembly must be carried out before the product has formed a skin.
It is recommended not to exert any immediate strain on the assembly.

SENSITIVE TO MOISTURE RESTRICTED TO PROFESSIONAL USERS STORAGE +2°C Avoid discharge into drains, water courses or onto the ground. Store in tightly closed original container. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Avoid contact with oxidizing agents. Vulcanises at room temperature on contact with moisture in the air. For further information, refer to Section 10: "Stability and Reactivity". Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.ELV;RoHS;WEEE


CAF 22 OX is a one-component silicone elastomer that cures at room temperature:


1 Part RTV Oxime




  • Primerless adhesion to many surfaces.
  • High elongation.
  • Very low corrosion.
  • No migration at temperature.
  • Low odour.
  • Easy to extrude.


CAF 22 OX is mainly intended for professional customers as a flexible bonding agent for bonding and sealing applications between different types of materials.
Its elongation/break properties allow it to withstand large differential expansion movements.
It can be used for the following applications: mechanical, electronics, bonding of components, rubber parts and hoses, attaching of fascias, strengtheners, rings and panels.

  • Sealing/bonding in the domestic appliance sector:
    - Vitroceramic hobs.
    - Sealing of oven doors.
  • Bonding in the refrigeration industry.
  • Sealing in automotive industry: gearboxes.


Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.




Elongation450MonocompNF ISO 37%
Hardness20MonocompISO 868sh.A
Flowability< 2MonocompBOEING S 7502mm
Extrusion rate80MonocompASTM C 1183g/min
Tensile strength1.5MonocompNF ISO 37MPa











































All rights reserved © Elkem Silicones 2018