Processing is particularly easy because the product is delivered ready to use. Application can either be carried out manually or using robotized application equipment.

CAF 1 and CAF 1 Extra Fluid are applied on one of the two joint surfaces. Assembly must be carried out before the product has formed a skin.

It is recommended to apply CAF 1 and CAF 1 Extra Fluid to clean and dry surfaces.

SENSITIVE TO MOISTURE STORAGE +2°C Avoid discharge into drains, water courses or onto the ground. Store in tightly closed original container. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Avoid contact with oxidizing agents. Vulcanises at room temperature on contact with moisture in the air. For further information, refer to Section 10: "Stability and Reactivity". Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.ELV;RoHS;WEEE


CAF 1 and CAF 1 Extra Fluid are one component room temperature curing silicone elastomers:

  • Acetic.
  • Variable rheology, from self-leveling to fluid, from CAF 1 to CAF 1 Extra Fluid.
  • Red.


1 Part RTV Acetoxy



  • CAF 1 and CAF 1 Extra Fluid cure quickly and have very good resistance to high temperature.
  • CAF 1 and CAF 1 Extra Fluid therefore ensure perfect sealing and bonding between different materials subject to thermal strain.
  • CAF 1 and CAF 1 Extra Fluid also have high resistance to chemical agents.

CAF 1 and CAF 1 Extra Fluid are mainly used in sealing and bonding applications in which low viscosity is required.

CAF 1 and CAF 1 Extra Fluid are notably used for:
  • Sealing of electrical heating elements (CAF 1 Extra Fluid).
  • Engine sealing in automotive after sales service (CAF 1).
  • General maintenance in the aeronautics industry (CAF 1).

Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.




Hardness54MonocompISO 868sh.A
Viscosity7500MonocompNF T 76102mPa.s
Elongation110MonocompNF ISO 37%
Tensile strength3MonocompNF ISO 37MPa











































All rights reserved © Elkem Silicones 2018