Product

 

 

SILBIONE MED ADH 4200 may be stored for up to 12 months from its date of manufacturing.Please consult the Safety Data Sheet of this product.Healthcare USP Class VI

SILBIONE MED ADH 4200

SILBIONE  MED ADH 4200 RTV is a single component silicone adhesive designed for medical applications where a high strength elastic bond to silicone, polyester, metals, Polyurethane, and other substrates is needed. SILBIONE  MED ADH 4200 RTV cures at room temperature by exposure to ambient moisture to form a tough, elastic bond. During curing, acetic acid is released as a by-product.

SILBIONE  MED ADH 4200 RTV contains no tin, solvents or plasticizers and is designed to self-level.

1 Part RTV Acetoxy

Liquid Silicone Rubber

Healthcare USP Class VI

  • ​Fast room temperature curing - No need for humidity chambers to accelerate cure
  • Strong adhesion to numerous substrates commonly used in medical device industry

Asia Pacific;Central and South America;Europe Middle East Africa;North America

 Characteristics_A

 

 

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

Cure:

Surfaces to be bonded with adhesive should be pre-scrubbed thoroughly with a clean, soft sponge or soft-bristled brush in hot water-soap solution to remove possible surface contaminants. Do not use synthetic detergents or oil-based soaps. Rinse with copious amounts of hot water, then rinse with distilled water and dry thoroughly. Apply SILBIONE®  MED ADH 4200 RTV adhesive and then mate the surfaces together with light pressure. A bond thickness of 0.010" minimum is recommended to achieve optimum strength. Initial cure is typically achieved in 10 minutes. Ultimate cure and optimal physical properties will be achieved after 24-120 hours at 25°C and ambient moisture.

​Cure Surfaces to be bonded with adhesive should be pre-scrubbed thoroughly with a clean, soft sponge or soft-bristled brush in hot water-soap solution to remove possible surface contaminants. Do not use synthetic detergents or oil-based soaps. Rinse with copious amounts of hot water, then rinse with distilled water and dry thoroughly. Apply SILBIONE® MED ADH 4200 RTV adhesive and then mate the surfaces together with light pressure. A bond thickness of 0.010" minimum is recommended to achieve optimum strength. Initial cure is typically achieved in 10 minutes. Ultimate cure and optimal physical properties will be achieved after 24-120 hours at 25°C and ambient moisture.

 

 

Cure:

Surfaces to be bonded with adhesive should be pre-scrubbed thoroughly with a clean, soft sponge or soft-bristled brush in hot water-soap solution to remove possible surface contaminants. Do not use synthetic detergents or oil-based soaps. Rinse with copious amounts of hot water, then rinse with distilled water and dry thoroughly. Apply SILBIONE®  MED ADH 4200 RTV adhesive and then mate the surfaces together with light pressure. A bond thickness of 0.010" minimum is recommended to achieve optimum strength. Initial cure is typically achieved in 10 minutes. Ultimate cure and optimal physical properties will be achieved after 24-120 hours at 25°C and ambient moisture.

​Cure Surfaces to be bonded with adhesive should be pre-scrubbed thoroughly with a clean, soft sponge or soft-bristled brush in hot water-soap solution to remove possible surface contaminants. Do not use synthetic detergents or oil-based soaps. Rinse with copious amounts of hot water, then rinse with distilled water and dry thoroughly. Apply SILBIONE® MED ADH 4200 RTV adhesive and then mate the surfaces together with light pressure. A bond thickness of 0.010" minimum is recommended to achieve optimum strength. Initial cure is typically achieved in 10 minutes. Ultimate cure and optimal physical properties will be achieved after 24-120 hours at 25°C and ambient moisture.

 NeedAnExpert

 

 

 

 

 CS

 

 

 SS

 

 

 Certif

 

 

 

 

 Brochures

 

 

 TDS