KEChttps://silicones.elkem.com/EN/Our_offer/KECKEC

CHINAPLAS 2017

 

 

Product(s) / TechnologyProduct(s) / Technologyhttps://silicones.elkem.com/EN/Our_offer/KEC/Pages/CHINAPLAS-2017.aspx2017-04-07T09:29:29ZEileen JIANG

Bluestar Silicones launches new products for cable harness solutions of new energy vehicles

​CHINAPLAS 2017: Bluestar Silicones launches new products for cable harness solutions of new energy vehicles.


Bluestar Silicones will present a new serie of products: MF 8360 U HT, MF 8370 U HT, MF 8160 U, MF 8170 U and MF 8270 U at the 31th International Exhibition on Plastics and Rubber Industries (CHINAPLAS 2017). These products are designed for applications in automotive high-voltage cables, and comply with LV112, LV216, ISO6722 and QC/T1037 standards.

Welcome to visit Bluestar Silicones booth 12.2J41.

BLUESIL® MF 8360 U HT, MF 8370 U HT, MF 8160 U, MF 8170 U and MF 8270 U

New energy vehicles (NEVs) are coming into a development climax with the increasing concerns on environment and energy. Compared with traditional fuel vehicles, hybrid electric vehicles (HEVs) and battery electric vehicles (BEVs) are provided with more high-voltage components such as power battery, high voltage distribution box, drive motor and motor controller, thus setting up new requirements for automotive cables. Firstly, as these cables work in front engine and chassis locations with high temperature and small space, cables need to have flexibility, small turning radius and excellent resistance to high and low temperatures. Secondly, the vehicles work under complex road conditions, cables must have good wear resistance and high mechanical strength. In addition, cables are required to offer short-term overload capacity to withstand instantaneous high current in case of fluctuations in vehicle speed, especially under the conditions like climbing at full load.

Crosslinked polyolefins and thermoplastic elastomers are now available for insulation of automotive power cables. With resistance to high temperature of up to 150℃, crosslinked polyolefins is relatively hard and difficult to be installed within small space of vehicle body. Such materials require complicated process of irradiation crosslinking which is not suitable for power cables with a large cross-section. With resistance to high temperature of not more than 125℃, thermoplastic elastomers has lower heat-resistance rating for power cables, leading to a risk of cracking after long-term use.

In response to these new challenges, Bluestar Silicones will present a range of new products for cables of new energy vehicles -BLUESIL® MF 8360 U HT, MF 8370 U HT, MF 8160 U, MF 8170 U and MF 8270 U at the CHINAPLAS 2017. These products are suitable for traditional hot air and salt bath vulcanization, as well as steam vulcanization, with the selection of vulcanization agent depending on specific process.

These products have the following advantages: excellent mechanical strength and electrical properties, resistance to temperature of up to 180℃ or 200℃; soft and very flexible at low temperature, excellent insulation performance; resistant to fire, aging and chemicals; and particularly its good flexibility resulting in easy installation even in a small space under the hood. These advantages made them ideal for insulation of battery cables, ignition wires and  high voltage cables.

BLUESIL® MF 8360 U HT and MF 8370 U HT are rated to comply with LV112 Class E, and tested for resistance to long-term aging of 3,000 hours at 180℃, with tear strength > 15 N/mm.

BLUESIL® MF 8160 U, MF 8170 U and MF 8270 U are rated to comply with LV 112 Class F and ISO 6722 Class F, and have tear strength (ISO 34-1b) >10N/mm and resistance to heat aging of 3,000 hours at 200℃.

In addition to HCR solutions for cables of new energy vehicles, Bluestar Silicones will present a range of silicone rubbers for automotive applications such as exhaust pipe lifting lug, shock absorption, cylinder liner sealing, turbocharger tube and spark plug boot. Moreover, Bluestar Silicones also will present silicone rubbers for kitchenware that comply with food contact regulations.

IMG_20150426_131351.jpg 

Mix & Fix® Center

These HCR products are manufactured in MIX & FIX® Center of Bluestar Silicones. Our MIX & FIX® Centers are located in Europe (Italy and Spain), China, North America and South America to closely respond to customer needs. Besides supplying master batches, they advise customers and provide them with tailor-made formulations from the SILBIONE® & BLUESIL® HCR (High Consistency Rubber) range with very short lead times that meet their specifications and are compatible with their manufacturing requirements.

Bluestar Silicones also provides a Reprocessing Service to its customers through its MIX & FIX® Center located all over the world. Customers can send samples of their silicone rubbers to these centers and explain the characteristics needed for the use of their stocks. Bluestar Silicones experts analyze these samples to see if they are reusable in their current state or if they can be reprocessed.

Other services include regulatory support, assistance to roll out productivity programs, training for your teams and collaborative work on new developments. In short, our MIX & FIX® Center are geared to provide you with the best products and all the advices, supports and services you need to implement the right solutions in your operations.

About Bluestar Silicones

With worldwide operations headquartered in Lyon, France, Bluestar Silicones is a €525 million worldwide silicones raw material manufacturer. The company is one of the world's leading fully integrated global silicones manufacturers with more than 60 years of silicone expertise. Bluestar Silicones has manufacturing operations throughout the world and combines upstream silicon metal operations and capacity with downstream silicone market and application development expertise. The company offers a comprehensive range of silicone technologies in support of diverse specialty markets including paper release, textile coatings, healthcare, moldmaking, automotive, aerospace, and personal care. Bluestar Silicones is owned by Elkem AS, Norway.

 

Media Contact: Eileen JIANG

Marketing Communication Manager

+ (86) 21 5442 8464  eileen.jiang@bluestarsilicones.com

Business Contact: Eva Chu

Marketing Manager

+(86) 21 5442 1962 Eva.chu@bluestarsilicones.com